Претраживање
Приказ резултата 1-10 од 20
Numerical modelling of concrete-filled steel tubular short columns under axial compression
(Building Materials and Structures, 2023)
The paper presents three-dimensional numerical models of short concrete-filled
steel tubular circular columns that can successfully describe the column behaviour
under axial compression. Several of the most commonly used ...
Potential and benefit of green roof energy renovation of existing residential buildings with a flat roof in Belgrade
(Applied Sciences, MDPI, 2023)
This paper considers the phenomenon of the instability of steel plane frame structures in the elastic-plastic domain. The numerical analysis uses FEM, where the corresponding stiffness matrices are based upon the trigonometric ...
Residential Building Stock in Serbia: Classification and Vulnerability for Seismic Risk Studies
(Bulletin of Earthquake Engineering, 2023)
Regional seismic risk assessment is necessary for designing effective seismic risk mitigation measures. In general, such risk assessment studies consist of three components: hazard, vulnerability, and exposure modelling. ...
Adriseismic Methodology for Expeditious Seismic Assessment of Unreinforced Masonry Buildings
(Buildings, 2023)
The paper describes a novel Adriseismic method for exp4editious assessment of seismic risk associated with unreinforced masonry buildings. The methodology was developed for the Adriseismic project of the Interreg ADRION ...
A multi-fidelity wind surface pressure assessment via machine learning: A high-rise building case
(Elsevier, 2023)
Computational fluid dynamics (CFD) represents an attractive tool for estimating wind pressures and wind loads on high-rise buildings. The CFD analyses can be conducted either by low-fidelity simulations (RANS) or by ...
Experimental Investigation and Numerical Analysis of the Axial Load Capacity of Circular Concrete-Filled Tubular Columns
(MDPI, 2024)
This paper focuses on the experimental investigation of the axial load capacity of CFT
(concrete-filled steel tube) columns under actual construction conditions during building reconstruction. A total of four samples were ...
Effects of material uncertainties on vibration performance cross laminated timber floors
(Society for Materials and Structures Testing of Serbia, BelgradeUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
Variety of wood species and complexity of their structure make the reliable material properties of cross-laminated timber (CLT) difficult to obtain, which can lead to inaccurate prediction of CLT behavior. Due to high ...
On the Wind Energy Resource above High-Rise Buildings
(MDPI, 2020)
One of the main challenges of urban wind energy harvesting is the understanding of the flow characteristics where urban wind turbines are to be installed. Among viable locations within the urban environment, high-rise ...
Parametric Study of Additional Temperature Stresses in Continuously Welded Rails on Steel Truss Railway Bridges
(MDPI (Basel, Switzerland), 2023)
Additional temperature stresses in continuously welded rails (CWRs) are caused by track/bridge interaction (TBI) due to thermal actions. Exceeding permissible stresses in CWRs on the bridge can lead to track buckling or ...
Experimental results of reinforced concrete frames with masonry infills with and without openings under combined quasi‑static in‑plane and out‑of‑plane seismic loading
(Bulletin of Earthquake Engineering, 2023)
Reinforced concrete (RC) frames with masonry infills can be encountered all over the world, especially in earthquake prone regions. Although masonry infills are usually not considered in the design process, in the case of ...