Претраживање
Приказ резултата 31-40 од 75
Augmented state estimation of urban settings using on-the-fly sequential Data Assimilation
(Elsevier, 2023)
A data-driven investigation of the flow around a high-rise building is per- formed by combining heterogeneous experimental samples and numerical models based on the Reynolds-Averaged Navier–Stokes (RANS) equations. The ...
Experimental Investigation and Numerical Analysis of the Axial Load Capacity of Circular Concrete-Filled Tubular Columns
(MDPI, 2024)
This paper focuses on the experimental investigation of the axial load capacity of CFT
(concrete-filled steel tube) columns under actual construction conditions during building reconstruction. A total of four samples were ...
Thermo-mechanical stability of FRP and FGM plates with geometrical imperfections using layer wise finite element
(The 12th Global Conference on Materials Science and Engineering (CMSE 2023), 2023)
One of the ultimate limit state important for the safe design of structures is failure due to buckling. The origin of buckling, as the sudden change in shape of structural component, may arise from mechanical as well from ...
On the Wind Energy Resource above High-Rise Buildings
(MDPI, 2020)
One of the main challenges of urban wind energy harvesting is the understanding of the flow characteristics where urban wind turbines are to be installed. Among viable locations within the urban environment, high-rise ...
Assessment of traffic-induced building vibrations using Transfer function method
(Association of Structural Engineers of Serbia, 2022)
As a result of rapid development of cities and construction of high-speed rail/road infrastructure, vibration serviceability of buildings due to traffic-induced vibrations has become a growing issue that affects the comfort ...
RC frames with masonry infills with and without openings: experimental and numerical results
(COMPDYN 2023 - 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Athens, Greece, 12-14 June 2023., 2023)
RC frames with masonry infills are a widespread construction form in seismically active regions. Under seismic loading, masonry infills are activated in in-plane direction due to the frame deformation. This leads to the ...
Experimental and numerical investigation of the seismic response of confined masonry walls
(COMPDYN 2023 - 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Athens, Greece, 12-14 June 2023., 2023)
Confined masonry (CM) is one of the most popular and affordable earthquake-resistant con-struction technology for masonry structures. The reinforced concrete (RC) tie-columns in such construction play a crucial role in ...
Isogeometric analysis of a spatially curved Bernoulli-Euler beam subjected to moving load / Изогеметријска анализа утицаја покрентог оптерећења на просторној криволинијској Бернули-Ојлеровој греди
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2022)
Dynamic analysis of a spatially curved Bernoulli-Euler beam subjected to the moving load is considered in this paper. The isogeometric approach is used for the spatial discretization of the weak form of the equation of ...
Pushover analysis of confined masonry walls using equivalent diagonal strut models
(Proceedings of the 2nd Croatian Conference on Earthquake Engineering - 2CroCEE Zagreb, Croatia - March 22 to 24, 2023., 2023)
Masonry structures are commonly used for building residential buildings throughout the Balkans and worldwide, in urban and rural areas and areas with seismic risk. For masonry construction in regions with seismic risk, ...
Numerical Modeling of Two Adjacent Interacting URM Structures
(IPSI, Belgrade, 2024)
Masonry structures in addition to their long heritage are still widely used in civil engineering practice. It should be emphasized that a lot of research has already been done on the seismic behavior of masonry structures. ...