Претраживање
Приказ резултата 21-25 од 25
Geometrically Nonlinear Analysis of Composite Plates Using Layerwise Displacement Model
(Faculty of Engineering, University of Porto, Portugal, 2011)
The low mass density and the high tensile strength, usually expressed through the specific modulus of elasticity and the specific strength, have made composite materials lighter and stronger compared with most traditional ...
An efficient beam-column element for nonlinear 3D frame analysis
(ECCOMAS Thematic Conference - COMPDYN 2011: 3rd International Conference on Computational Methods in, 2011)
A three-dimensional nonlinear beam-column element for the simulation of the global and local response of frames under monotonic and cyclic loading conditions is pre-sented. The element belongs to the group of concentrated ...
Effects of Creep and Shrinkage on Deflections of Continuous Composite Beams
(Proceedings of Abstracts IConSSM 2011, The 3rd International Congress of Serbian Society of Mechanics, Vlasina lake, Serbia, 5-8 July 2011, 2011)
Creep and shrinkage of concrete affect the behavior of steel-concrete composite
beams and should be taken into account in the analysis of these structures. A number of
methods which have different level of accuracy are ...
Analysis of Traffic Induced Building Vibrations Using Spectral Element Method
(Third Serbian (28th Yu) Congress on Theoretical and Applied Mechanics, 2011)
In this paper, the effects of traffic induced ground vibrations on the three frame buildings of different
height are analyzed. The structures are subjected to horizontal and vertical ground vibrations which were measured
in ...
Resistance of Composite Column to Compression and Bending
(Proceedings of the 14th International Symposium of MASE, Struga, Makedonija, 28. septembar 2018, 2011)
Design of the composite steel-concrete columns subjected to compression and bending, according to Eurocode
4, is shown in the paper. The effects of imperfections in the axial compression are taken into account
indirectly ...