Претраживање
Приказ резултата 1-10 од 42
Experimental investigation of wind flow around low-rise tilted house
(Faculty of Civil Engineering Subotica, 2019)
An experimental investigation has been conducted in order to give insight into wind flow characteristics in urban areas, in particular, its effects on low-rise buildings. Analyses are based on the results from atmospheric ...
Experimental investigation of wind load on low-rise industrial building
(Faculty of Civil Engineering Subotica, 2019)
Aim of this paper is to investigate wind pressure distribution on low-rise industrial
building based on the results from atmospheric boundary layer wind tunnel experiments.
Building model is a hanger with a tilted roof ...
Experimental and Numerical analysis of RC Frames with decoupled masonry infills
(COMPDYN 2019 - 7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2019)
Masonry infill walls are commonly used in reinforced concrete (RC) frame structures, also in seismically active areas, although they often experience serious damage during earthquakes. One of the main reasons for their ...
Pressure field analyses of a low-rise building model surrounded by neighbouring buildings in urban areas
(Serbian Society of Mechanics, 2019)
In this paper, pressure field over the roof of low-rise building model has been investigating using numerical simulations. The model is surrounded by four neighboring buildings of the same geometry as the principle one. ...
Comparison of different methods for viscoelastic analysis of composite beams
(Serbian Society of Mechanics, 2019)
The paper presents and compares four methods for visco-elastic analysis of steel-concrete composite beams. The method denoted as "exact" is based on the use of linear integro-differential operators and besides inevitable ...
Stability analysis of multi-story steel frames subjected to different axial load
(Serbian Society of Mechanics, 2019)
This paper presents a stability analysis of multi-story steel frames in the elastic and elasto-plastic domain. The concept of the tangent modulus theory is applied. Numerical analysis is carried out using FEM where ...
Experimental testing of axial load capacity and stability of circular CFT columns
(Serbian Society of Mechanics, 2019)
The paper presents the experimental testing of the axial capacity and stability of short,
moderately slender and slender circular CFT columns. For the purpose of sample testing a special
set of hydraulic presses was ...
Nonlinear analysis of composite plates using layerwise finite element
(Mathematical Institute of the Serbian Academy of Sciences and Arts National Institute of the Republic of Serbia, 2019)
Application of green roof for increasing the energy efficiency of the existing building in Belgrade
(Serbian Union of Mechanical and Electrical Engineering (SMEITS), 2019)
This paper presents the analysis of the potential use of green roofs to enhance the energy efficiency of the residential buildings. Namely, in urban areas, there is a lot of potential for reducing the energy needed for ...
Enhancing energy efficiency by application of green roof in residential building
(Faculty Of Civil Engineering Subotica, 2019)
Improving the energy efficiency in buildings in the Republic of Serbia has been recognized as an area with the greatest potential for reducing overall energy consumption. It also has an indirect impact on improving the ...