Претраживање
Приказ резултата 1-10 од 24
Bending analysis of cross-laminated-timber (CLT) panels using layered finite elements
(Univerzitet u Beogradu, Građevinski fakultetUniverzitet Crne Gore, Građevinski fakultet PodgoricaAkademija inženjerskih nauka Srbije, 2019)
Cross-laminated timber panels are composite wood products with an increasing application in civil engineering. The low environmental impact and high mechanical performance encourage the use of CLT in modern buildings instead ...
Tačna i približne metode proračuna spregnutih greda od čelika i betona / EXACT AND APPROXIMATE METHODS OF ANALYSIS OF STEEL-CONCRETE COMPOSITE BEAMS
(Univerzitet u Beogradu–Građevinski fakultetUniverzitet Crne Gore–Građevinski fakultetAkademija inženjerskih nauka Srbije, 2019)
The paper presents four different methods for viscoelastic analysis of steel-concrete composite structures: “exact” analysis method, simplified method, effective modulus method and method proposed by the European design ...
Primena metode dinamičke krutosti u analizi slobodnih vibracija otvorenih kružnih cilindričnih ljuski
(Univerzitet u Beogradu-Građevinski fakultet, Univerzitet Crne Gore-Građevinski fakultet, Akademija inženjerskih nauka Srbije, 2019)
In this paper, the dynamic stiffness method has been applied in the free vibration analysis of open circular cylindrical shells having special boundary conditions. Dynamic stiffness matrix, based on the exact solutions of ...
Proračun stabilnosti okvirnih nosača
(Univerzitet u Beogradu – Građevinski fakultetUniverzitet Crne Gore – Građevinski fakultetAkademija inženjerskih nauka Srbije, 2019)
Poslednjih nekoliko decenija značajno su se unapredila saznanja u vezi proračuna stabilnosti
okvirnih nosača. Zato je u ovom radu dat pregled postupaka iz ove oblasti. Prikazane su
tradicionalne metode koje se baziraju ...
Design of 120m guyed steel mast in Alibunar according to Eurocode
(MASE - Macedonian Association of Structural Engineers, 2019)
Guyed masts are slender tall structures widely used to support different kinds of antennas in telecommunications. They consist of a vertical tall mast laterally supported at several levels along its height by sets of ...
Experimental investigation of wind load on low-rise industrial building
(Faculty of Civil Engineering Subotica, 2019)
Aim of this paper is to investigate wind pressure distribution on low-rise industrial
building based on the results from atmospheric boundary layer wind tunnel experiments.
Building model is a hanger with a tilted roof ...
Development of dynamic stiffness method for free vibration analysis of plate structures
(University Ss. Cyril and Methodius, Faculty of Civil Engineering, Skopje, 2019)
In the paper, an overview of the development of the dynamic-stiffness-method-based computational model for the free vibration analysis of plates has been presented. Starting from several formulations of the so-called dynamic ...
Nonlinear Analysis of Composite Plates using Continuum Finite Element / Нелинеарна анализа композитних плоча применом коначног елемента континуума
(University of Belgrade, Faculty of Civil EngineeringUniversity of Montenegro, Faculty of Civil EngineeringAcademy of Engineering Sciences of Seribia, 2019)
In this paper the geometrically nonlinear plate finite element model, hitherto not reported in the literature, is developed using the total Lagrange formulation. With the layer wise displacement field of Reddy [1], nonlinear ...
Pressure field analyses of a low-rise building model surrounded by neighbouring buildings in urban areas
(Serbian Society of Mechanics, 2019)
In this paper, pressure field over the roof of low-rise building model has been investigating using numerical simulations. The model is surrounded by four neighboring buildings of the same geometry as the principle one. ...
Comparison of different methods for viscoelastic analysis of composite beams
(Serbian Society of Mechanics, 2019)
The paper presents and compares four methods for visco-elastic analysis of steel-concrete composite beams. The method denoted as "exact" is based on the use of linear integro-differential operators and besides inevitable ...