Search
Now showing items 21-30 of 40
Experimental results of reinforced concrete frames with masonry infills with and without openings under combined quasi‑static in‑plane and out‑of‑plane seismic loading
(Bulletin of Earthquake Engineering, 2023)
Reinforced concrete (RC) frames with masonry infills can be encountered all over the world, especially in earthquake prone regions. Although masonry infills are usually not considered in the design process, in the case of ...
Parametric Study of Additional Temperature Stresses in Continuously Welded Rails on Steel Truss Railway Bridges
(MDPI (Basel, Switzerland), 2023)
Additional temperature stresses in continuously welded rails (CWRs) are caused by track/bridge interaction (TBI) due to thermal actions. Exceeding permissible stresses in CWRs on the bridge can lead to track buckling or ...
RC frames with masonry infills with and without openings: experimental and numerical results
(COMPDYN 2023 - 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Athens, Greece, 12-14 June 2023., 2023)
RC frames with masonry infills are a widespread construction form in seismically active regions. Under seismic loading, masonry infills are activated in in-plane direction due to the frame deformation. This leads to the ...
Experimental and numerical investigation of the seismic response of confined masonry walls
(COMPDYN 2023 - 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Athens, Greece, 12-14 June 2023., 2023)
Confined masonry (CM) is one of the most popular and affordable earthquake-resistant con-struction technology for masonry structures. The reinforced concrete (RC) tie-columns in such construction play a crucial role in ...
Pushover analysis of confined masonry walls using equivalent diagonal strut models
(Proceedings of the 2nd Croatian Conference on Earthquake Engineering - 2CroCEE Zagreb, Croatia - March 22 to 24, 2023., 2023)
Masonry structures are commonly used for building residential buildings throughout the Balkans and worldwide, in urban and rural areas and areas with seismic risk. For masonry construction in regions with seismic risk, ...
Preisach model for inner hysteresis loops of cyclicly loaded mild steel elements
(International Conference Synergy of Architecture and Civil Engineering, 2023)
In this paper, the new type of Preisach model, that describes the inner hysteresis looops of structural mild steel under cyclic loading, is developed. It is the multilinear mechanical model, that describes closed hysteresis ...
Practical ANN prediction models for the axial capacity of square CFST columns
(Springer, 2023)
In this study, two machine-learning algorithms based on the artificial neural network
(ANN) model are proposed to estimate the ultimate compressive strength of square
concrete-filled steel tubular columns. The development ...
Impact of surroundings on the local peak pressure in high-rise building clusters
(AIM Group International, Italy, 2023)
This study contributes to the field of wind engineering by evaluating the local peak pressure coefficients in a generic high-rise building cluster. Unlike previous studies that have focused on isolated buildings or buildings ...
Low-Cycle Fatigue Damage Model for Ductile Materials
(The Fourth International Conference on Damage MechanicsLouisiana State University, 2023)
In this paper, a uniaxial material model with the ability to describe progressive damage growth, but also to provide a reliable estimation of fatigue life in the low-cycle regime of loading, is presented. The determination ...
Flat slab response for seismic and cyclic actions prediction with numerical models
(Engineering Structures, 2023)
As an outcome of a recent European research project, the modelling of the response of flat slab structures for seismic and cyclic loading was the object of a blind competition. No other blind tests are available in the ...