Претраживање
Приказ резултата 21-30 од 62
Hysteretic behavior of rectangular tube (box) sections based on Preisach model
(Archive of Applied Mechanics, 2012)
In the present paper, the Preisach model of hysteresis is applied to model cyclic behavior of elasto-plastic material. Rate of loading and viscous effects will not be considered. The problem of axial loading of rectangular ...
Linear static isogeometric analysis of an arbitrarily curved spatial Bernoulli-Euler beam
(Elsevier B.V., 2018)
The present research is focused on the linear analysis of a spatial Bernoulli-Euler beam. Metrics of the reference and deformed configurations are rigorously defined with respect to the convective coordinate frame of ...
Verification of deflection according to Eurocode 2
(Wiley-Blackwell, 2017)
Code provisions for a simplified check of the long-term deflection of concrete structures are generally developed for predefined values of the relevant input parameters. Deflection calculation may be of interest to account ...
Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk (Teil 1) / Design of reinforced concrete enclosures infilled with clay block masonry (Part 1)
(Bauverlag BV GmbH, 2018)
Within the scope of the joint European project INSYSME, the German partners developed two systems - IMES and INODIS - for improving the seismic behaviour of masonry infilled reinforced concrete frames. The purpose of both ...
Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk (Teil 2) / Design of reinforced concrete enclosures infilled with clay block masonry (Part 2)
(Bauverlag BV GmbH, 2018)
Within the scope of the joint European project INSYSME, the German partners developed two systems - IMES and INODIS - for improving the seismic behaviour of masonry infilled reinforced concrete frames. The purpose of both ...
Free vibration analysis of plate assemblies using the dynamic stiffness method based on the higher order shear deformation theory
(Academic Press, 2016)
This paper deals with the free vibration analysis of isotropic plate assemblies using the dynamic stiffness method (DSM) based on the Reddy's higher-order shear deformation theory (HSDT). Using the proposed method, the ...
Analysis based on the energy release rate criterion of a dynamically growing crack approaching an interface
(SAGE Publications Ltd, 2016)
A problem of a dynamically growing crack, which is approaching an interface between the two elastic isotropic materials at an arbitrary angle, is considered in this paper. That crack could behave in three ways: (i) it can ...
Garden cultural heritage spatial functionalities: The case of anamorphosis abscondita at Vaux-le-Vicomte
(Elsevier Masson SAS, 2016)
This paper analyzes the phenomenon of spatial functionalities for garden cultural heritage design and the relationships between the sizes of the sections and elements of the baroque garden of Vaux-leVicomte and the specific ...
Free vibration analysis of spatial Bernoulli–Euler and Rayleigh curved beams using isogeometric approach
(Elsevier Inc., 2019)
This paper deals with the linear free vibration analysis of Bernoulli–Euler and Rayleigh curved beams using isogeometric approach. The geometry of the beam as well as the displacement field are defined using the NURBS basis ...
Thermo-mechanical bending of laminated composite and sandwich plates using layerwise displacement model
(Elsevier Ltd, 2015)
The objective of this paper is thermo-mechanical bending of laminated composite and sandwich plates subjected to mechanical load and linearly varying through the thickness temperature field. Mathematical model, based on ...