Претраживање
Приказ резултата 1-10 од 62
Investigation of the seismic behaviour of structural and non-structural components in industrial facilities by means of shaking table tests
(SEDIF 2020 – 2nd International Conference on Seismic Design of Industrial Facilities, 2020)
Industrial facilities consist of the primary load-carrying structure and various process engineering components (secondary structures), which under seismic loading, may exhibit significant damage that may threaten their ...
Seismic performance of multiple-component systems in special risk industrial facilities
(17th World Conference on Earthquake Engineering, 2020)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...
Penalty method for 1d problem of two rods with basic concepts of contact mechanics of frictionless contact
(Contemporary achievements in civil engineering 22-23. April 2021. Subotica, SERBIA,8th INTERNATIONAL CONFERENCE, 2021)
Problems involving contact are of great importance in industry related to
mechanical and civil engineering, but also in biomechanics and other applications. The
contact interaction between surfaces in a bolted splice ...
Performance of reinforced concrete buildings during the November 26, 2019 Albania earthquake (Mw 6.4) and December 29, 2020 Petrinja earthquake (Mw 6.4)
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Past earthquakes have affected millions of people whose lives changed within a minute, and caused damage or collapse of thousands of buildings and infrastructure systems. In many cases, earthquakes have long-term consequences. ...
Development of frequency curves for cross-laminated timber (CLT) floors using dynamic stiffness method
(European Association for Structural Dynamics, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering practice, as full size walls or floor structures. CLT provides a compelling alternative to the concrete and ...
Numerical Analysis of the Response of the RC Flat Slab Building under Seismic Action
(fib Symposium 2021, 2021)
Investigation of the behaviour of flat slab system has been intensified in the last years. Wide use of flat slab systems due to the fast construction and simplicity of formwork has as the results presence of flat slab ...
Influence of prior in-plane damage on the out-of-plane response of non-load bearing unreinforced masonry walls under seismic load
(COMPDYN 2021 - 8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2021)
Reinforced concrete frames with masonry infill walls are popular form of construction all over the world as well in seismic regions. While severe earthquakes can cause high level of damage of both reinforced concrete and ...
Vibrations of rectangular flexible foundation on halfspace
(EASD Procedia, 2020)
A semi-analytical method deals with vertical vibrations of a massive, flexible rectangular foundation smoothly jointed to an elastic, homogeneous halfspace is presented. The method is based on the solution in frequency ...
Linear transient analysis of spatial curved Bernoulli – Euler beam using isogeometric approach
(Serbian Society of Mechanics, 2021)
In this paper, linear transient analysis of spatial curved Bernoulli – Euler beam with circular cross – section formulated using isogeometric approach has been presented. The isogeometric approach is based on the concept ...
Experimental investigation on the seismic performance of a multicomponent system for major-hazard industrial facilities
(Proceedings of the ASME 2021 Pressure Vessels & Piping Conference PVP 2021, 2021)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...