Претраживање
Приказ резултата 21-30 од 54
Low-Cycle Fatigue Damage Model for Ductile Materials
(The Fourth International Conference on Damage MechanicsLouisiana State University, 2023)
In this paper, a uniaxial material model with the ability to describe progressive damage growth, but also to provide a reliable estimation of fatigue life in the low-cycle regime of loading, is presented. The determination ...
Preisach model for inner hysteresis loops of cyclicly loaded mild steel elements
(International Conference Synergy of Architecture and Civil Engineering, 2023)
In this paper, the new type of Preisach model, that describes the inner hysteresis looops of structural mild steel under cyclic loading, is developed. It is the multilinear mechanical model, that describes closed hysteresis ...
Ojačanje i sanacija elemenata temeljne konstrukcije distributivnog centra UNIVEREXPORT
(Društvo građevinskih konstruktera Srbije, 2020)
During the previous period, large and uneven settlements of the ''UNIVEREXPORT'' distribution center occurred on one part of the main structure and foundation slab. These settlements are such that they affect the normal ...
Numerički postupak za određivanje stanja deformacija i napona u AB presecima
(Društvo građevinskih konstruktera Srbije, 2022)
U radu je dat predlog jednog numeričkog postupka za određivanje stanja deformacija i napona u armiranobetonskim presecima. Postupak se zasniva na MKE sa korišćenjem “fiber“ elemenata. Za predložene veze napona i deformacija ...
Landslide stabilization in cut zone number 6 from km 28 + 478,00 to km 28 + 643,00
(8th International conference ''Contemporary achievements in civil engineering'', 22-23. April 2021. Subotica, 2021)
In the cut zone number 6 on E-80 Niš-Dimitrovgrad highway from km 28 +
478,00 to km 28 + 643,00 slope stability was affected causing mass movement. Additional
inclinometers measured the mass wasting thickness between 14 ...
A Novel ANN Technique for Fast Prediction of Structural Behavior
(6th International Conference WE BUILD THE FUTURE 2022 International Construction Management Conference November 17-18, 2022, Belgrade, Serbia, 2022)
In recent decades, different concepts of machine learning (ML) have found applications in solving many engineering problems. Less time consumption in performing analyses, better optimization of the quality-price ratio and ...
Implementation of Hybrid ANN-GWO Algorithm for Estimation of the Fundamental Period of RC-Frame Structures
(Second Serbian International Conference on Applied Artificial Intelligence, Kragujevac, Serbia, 2023)
The fundamental period (TFP) of vibration is one of the most important parameters in structural design since it is used to assess the dynamic response of the structures. It is the time taken by a structure or system to ...
Designed solution for the foundation pit protection of the underground garage in Vlajkovićeva street
(Društvo građevinskih konstruktera Srbije, 2022)
Within the design of the underground garage in Vlajkovićeva Street, various variant solutions for the foundation pit protection and neighboring buildings were considered. It is necessary to meet the condition that the ...
Impact of surroundings on the local peak pressure in high-rise building clusters
(AIM Group International, Italy, 2023)
This study contributes to the field of wind engineering by evaluating the local peak pressure coefficients in a generic high-rise building cluster. Unlike previous studies that have focused on isolated buildings or buildings ...
Free vibration analysis of FGM plates by using layer wise displacement model
(Serbian Society for Computational Mechanics, 2023)
In this paper, the free vibration analysis of simply supported functionally graded material (FGM) plate is analyzed. The displacement model based on Generalized Laminate Plate Theory (GLPT) assumes layer wise (LW) linear ...