Претраживање
Приказ резултата 141-146 од 146
Pressure field analyses of a low-rise building model surrounded by neighbouring buildings in urban areas
(Serbian Society of Mechanics, 2019)
In this paper, pressure field over the roof of low-rise building model has been investigating using numerical simulations. The model is surrounded by four neighboring buildings of the same geometry as the principle one. ...
The Complement of the Hugelschaffer’s Construction of the Egg Curve
(Belgrade: Faculty of Architecture in Belgrade; Serbian Society for Geometry and Graphics (SUGIG), 2010)
Hügelschäffer’s construction, based on the distortion of the
ellipse construction, provides an egg-shaped curve. This curve is a
mixed cubic curve, the cubic hyperbolic parabola of type A. Curve is a
three-branched and ...
Investigation of Vibration Caused by Traffic and Railway Load
(Missouri University of Science and Technology, 2010)
Two examples related to the investigation of vibrations in civil engineering structures are presented. In the first example, it is shown how it is possible to decrease vibration in underground structures. These vibrations ...
Pit protection for deep excavations-modern methods of construction and design
(Faculty of Civil Engineering Ljubljana, 2014)
In urban areas, increasingly there is a need for building of a higher number of underground floors. Construction of pit protection for deep excavations in urban conditions, next to existing objects in the complicated ...
Inovativni system za seizmički otpornu zidanu ispunu u armiranobetonskim ramovskim konstrukcijama
(Međunarodna konferencija “Savremena Građevinska praksa 2019”, 2019)
Armiranobetonske (AB) ramovske konstrukcije zauzimaju značajan procenat armiranobetonskih konstrukcija u svetu, pogotovo u seizmički aktivnim područjima. Ramovi su najčešće ispunjeni zidanom ispunom zbog jednostavnosti i ...
Geometrically Nonlinear Analysis of Composite Plates Using Layerwise Displacement Model
(Faculty of Engineering, University of Porto, Portugal, 2011)
The low mass density and the high tensile strength, usually expressed through the specific modulus of elasticity and the specific strength, have made composite materials lighter and stronger compared with most traditional ...