Search
Now showing items 51-60 of 79
Augmented state estimation of urban settings using on-the-fly sequential Data Assimilation
(Elsevier, 2023)
A data-driven investigation of the flow around a high-rise building is per- formed by combining heterogeneous experimental samples and numerical models based on the Reynolds-Averaged Navier–Stokes (RANS) equations. The ...
Low-Cycle Fatigue Damage Model for Ductile Materials
(The Fourth International Conference on Damage MechanicsLouisiana State University, 2023)
In this paper, a uniaxial material model with the ability to describe progressive damage growth, but also to provide a reliable estimation of fatigue life in the low-cycle regime of loading, is presented. The determination ...
Comparative analysis of patch loading buckling resistances according to existing and new Eurocode
(Association of Structural Engineers of Serbia, 2022)
Summary:
This paper compares the procedures for calculating steel plate girders according to thе current
standards ЕN1993-1-5: 2006 [1] and the new version prEN1993-1-5: 2020, which is in the final
stage of development ...
Ojačanje i sanacija elemenata temeljne konstrukcije distributivnog centra UNIVEREXPORT
(Društvo građevinskih konstruktera Srbije, 2020)
During the previous period, large and uneven settlements of the ''UNIVEREXPORT'' distribution center occurred on one part of the main structure and foundation slab. These settlements are such that they affect the normal ...
A Preisach Model for The Lead-Rubber Bearing Hysteresis Loop
(8th International Conference of Contemporary Achievements in Civil Engineering, Subotica, Serbia, 2021)
Lead-rubber bearings are often used as isolation/dissipation devices in the bridge structures, as they provide both, period shift and increased damping in the structure, reducing significantly the seismic forces and ...
Experimental modal analysis of cross-laminated timber floors
(EURODYN 2023, XII International Conference on Structural Dynamics, 02-05 July 2023, Delft, The Netherlands, 2023)
Cross-laminated timber (CLT) floors have gained in popularity due to their outstanding strength,
aesthetic appeal, good fire resistance, and high level of prefabrication. However, due to their
high stiffness-to-weight ...
Experimental results of reinforced concrete frames with masonry infills with and without openings under combined quasi‑static in‑plane and out‑of‑plane seismic loading
(Bulletin of Earthquake Engineering, 2023)
Reinforced concrete (RC) frames with masonry infills can be encountered all over the world, especially in earthquake prone regions. Although masonry infills are usually not considered in the design process, in the case of ...
Software for calculation of pedestrian-induced vibration of floors / Softver za proračun vibracija međuspratnih konstrukcija usled dinamičke sile pešaka
(Association of Structural Engineers of Serbia, 2022)
Trends in contemporary architecture towards open-plan spaces in commercial and residential
buildings have created problems with excessive vibrations of large-span floors induced by active
people. Solving vibration ...
Composite Steel-Concrete Beam Analysis using Different Methods
(Univerzitet u Beogradu Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
The paper compares the following methods for analysis of composite steel-concrete beams: the
“exact” analysis method, simplified method, effective modulus method and the method proposed
by Eurocode 4 design code. The ...
Damage of masonry infilled RC structures in February 2023 earthquakes sequence in Turkey. Decoupled infill as a solution for better behaviour
(Departman za građevinarstvo i geodeziju, Fakulteta tehničkih nauka, Univerziteta u Novom Sadu, 2023)
The predominant form of damage observed during the February 2023 earthquakes in Turkey was the extensive failure of infill walls. This paper offers an insight into the repercussions of these earthquakes on infills, as well ...