Претраживање
Приказ резултата 71-80 од 105
Large deflection analysis of laminated composite plates using layerwise displacement model
(Structural Engineering and Mechanics, 2011)
In this paper the geometrically nonlinear continuum plate finite element model, hitherto not reported in the literature, is developed using the total Lagrange formulation. With the layerwise displacement field of Reddy, ...
Free vibration analysis of spatial Bernoulli–Euler and Rayleigh curved beams using isogeometric approach
(Elsevier Inc., 2019)
This paper deals with the linear free vibration analysis of Bernoulli–Euler and Rayleigh curved beams using isogeometric approach. The geometry of the beam as well as the displacement field are defined using the NURBS basis ...
In-plane free vibration and response analysis of isotropic rectangular plates using the dynamic stiffness method
(Elsevier Ltd, 2015)
The development of the dynamic stiffness matrix for isotropic rectangular plate with arbitrary boundary conditions undergoing in-plane free vibration is presented in this paper. Gorman's superposition method is exploited ...
Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk (Teil 1) / Design of reinforced concrete enclosures infilled with clay block masonry (Part 1)
(Bauverlag BV GmbH, 2018)
Within the scope of the joint European project INSYSME, the German partners developed two systems - IMES and INODIS - for improving the seismic behaviour of masonry infilled reinforced concrete frames. The purpose of both ...
Triangular proportional scheme and concept of the two serbian medieval churches
(Springer Verlag, 2019)
Serbian medieval architectural heritage is notable for its sacred architecture including numerous Christian Orthodox churches built at the territory of former Raška state during the period from the 12th to the 14th centuries. ...
An efficient beam-column element for inelastic 3D frame analysis
(Springer Netherland, 2013)
Beam-column elements with section resultant plasticity for the hysteretic behavior of the end plastic hinges are widely used for numerical simulations in earthquake engineering practice because of the good compromise between ...
Analysis based on the energy release rate criterion of a dynamically growing crack approaching an interface
(SAGE Publications Ltd, 2016)
A problem of a dynamically growing crack, which is approaching an interface between the two elastic isotropic materials at an arbitrary angle, is considered in this paper. That crack could behave in three ways: (i) it can ...
New procedure for dynamic structural reanalysis
(Latest Trends On Engineering Mechanics, Structures, Engineering Geology, 2010)
The methods of structural dynamic modification, especially those with their roots in finite element models, have often been described as reanalysis. The present paper deals with the problem of improving of dynamic ...
Wind energy potential above a high-rise building influenced by neighboring buildings: An experimental investigation
(Elsevier, 2018)
It is believed that the local topology has a significant effect on the wind flow pattern, wind velocity and turbulence intensity of the flow above the roof of buildings and thus is significantly influencing wind harvesting ...
Hybrid approach for two dimensional damage localization using piezoelectric smart aggregates
(Elsevier Ltd, 2017)
In the paper, a novel approach for damage localization in reinforced concrete plates, based on the computational analysis of piezoelectric smart aggregates, has been presented. The hybrid approach for damage localization ...