Претраживање
Приказ резултата 1-10 од 15
Performance of masonry infill walls in reinforced concrete frame buildings in recent earthquakes
(International Symposium on Durrës Earthquakes and Eurocodes, 2020)
Reinforced concrete (RC) frame structural system is widely used for housing and commercial construction in urban areas around the world. Exterior and interior partitions are in the form of masonry infills, which are usually ...
Effects of mechanical uncertainties on dynamic properties of cross-laminated timber floors
(European Association for Structural Dynamics, 2020)
This paper investigates the effects of material properties (mass density, elastic and shear moduli) on dynamic properties of simply-supported CLT floors (natural frequencies, mode shapes and modal mass). Uncertainty ...
Earthquake-proof system for masonry infills in RC frame structures
(International Journal of Masonry Research and Innovation, 2020)
The use of masonry infill walls in RC frame structures is common in many countries, even in seismically active areas, where the observations made after strong earthquakes have shown that masonry infills significantly modify ...
Seismic behaviour of RC frames with uncoupled masonry infills having two storeys or two bays
(Brick and Block Masonry-From Historical to Sustainable Masonry: Proceedings of the 17th International Brick/Block Masonry Conference (17th IB2MaC 2020), 2020)
Reinforced concrete (RC) structures with masonry infills are widely used for several types of buildings all over the world. However, it is well known that traditional masonry infills constructed with rigid contact to the ...
Seismic performance of multiple-component systems in special risk industrial facilities
(17th World Conference on Earthquake Engineering, 2020)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...
Investigation of the seismic behaviour of structural and non-structural components in industrial facilities by means of shaking table tests
(SEDIF 2020 – 2nd International Conference on Seismic Design of Industrial Facilities, 2020)
Industrial facilities consist of the primary load-carrying structure and various process engineering components (secondary structures), which under seismic loading, may exhibit significant damage that may threaten their ...
A Preisach Model for Monotonic Tension Response of Structural Mild Steel with Damage
(Budapest University of Technology and Economics, 2020)
This paper presents the new type of Preisach model that describes the elastoplastic behavior of structural mild steel under axial monotonic tension load with damage. Newly developed model takes into account elastic region, ...
Three-dimensional stress analysis and design of cross-laminated timber panels using full-layerwise-theory-based finite element method
(Elsevier, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering, as full size walls or light floor structures. Due to their low environmental impact, excellent thermal ...
Numerical analysis of reinforced concrete frame buildings with decoupled infill walls
(Building materials and structures, 2020)
Reinforced concrete (RC) buildings with masonry infill walls are widely used in many countries all over the world. Although infills are considered as non-structural elements, they significantly change dynamic characte-ristics ...
Vibrations of rectangular flexible foundation on halfspace
(EASD Procedia, 2020)
A semi-analytical method deals with vertical vibrations of a massive, flexible rectangular foundation smoothly jointed to an elastic, homogeneous halfspace is presented. The method is based on the solution in frequency ...