Претраживање
Приказ резултата 1-10 од 17
Shear design of circular concrete sections according to the EC2 truss model
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Blvd. Partizanski odredi No. 24 P.Box. 560, 1000 Skopje, Republic of North Macedonia, 2023)
Shear design in Eurocode 2 is generally developed for rectangular sections or T-sections that have
clearly defined tension reinforcement, concentrated in the cross-sectional tension zone, and an
unambiguous width of ...
Low-Cycle Fatigue Damage Model for Ductile Materials
(The Fourth International Conference on Damage MechanicsLouisiana State University, 2023)
In this paper, a uniaxial material model with the ability to describe progressive damage growth, but also to provide a reliable estimation of fatigue life in the low-cycle regime of loading, is presented. The determination ...
Preisach model for inner hysteresis loops of cyclicly loaded mild steel elements
(International Conference Synergy of Architecture and Civil Engineering, 2023)
In this paper, the new type of Preisach model, that describes the inner hysteresis looops of structural mild steel under cyclic loading, is developed. It is the multilinear mechanical model, that describes closed hysteresis ...
Effect of Inter-panel Connections on Modal Properties of Cross-Laminated Timber Floors
(International Conference on Experimental Vibration Analysis for Civil Engineering Structures EVACE, Politecnico di Milano, Italy, August 30 – September 1, 2023S 2023, 2023)
Cross-laminated timber (CLT) floors are typically composed of prefabricated CLT panels assembled on a construction site. The actual connections are commonly disregarded at design stage. CLT floors are modelled either as a ...
Impact of surroundings on the local peak pressure in high-rise building clusters
(AIM Group International, Italy, 2023)
This study contributes to the field of wind engineering by evaluating the local peak pressure coefficients in a generic high-rise building cluster. Unlike previous studies that have focused on isolated buildings or buildings ...
A Comparative Study of ML and FEM Models for the Prediction of Seismic Structural Behavior
(International Conference Natural Resources and Environmental Risks: Towards a Sustainable Future, Building of Branch of the Serbian Academy of Sciences and Arts in Novi Sad, Serbia, 2023)
During the last several decades, the finite element method (FEM) is the most commonly used numerical method for performing seismic structural analysis. It requires careful structural modeling, but also the adjustment of ...
Damage of masonry infilled RC structures in February 2023 earthquakes sequence in Turkey. Decoupled infill as a solution for better behaviour
(Departman za građevinarstvo i geodeziju, Fakulteta tehničkih nauka, Univerziteta u Novom Sadu, 2023)
The predominant form of damage observed during the February 2023 earthquakes in Turkey was the extensive failure of infill walls. This paper offers an insight into the repercussions of these earthquakes on infills, as well ...
Implementation of Hybrid ANN-GWO Algorithm for Estimation of the Fundamental Period of RC-Frame Structures
(Second Serbian International Conference on Applied Artificial Intelligence, Kragujevac, Serbia, 2023)
The fundamental period (TFP) of vibration is one of the most important parameters in structural design since it is used to assess the dynamic response of the structures. It is the time taken by a structure or system to ...
RC frames with masonry infills with and without openings: experimental and numerical results
(COMPDYN 2023 - 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Athens, Greece, 12-14 June 2023., 2023)
RC frames with masonry infills are a widespread construction form in seismically active regions. Under seismic loading, masonry infills are activated in in-plane direction due to the frame deformation. This leads to the ...
Experimental and numerical investigation of the seismic response of confined masonry walls
(COMPDYN 2023 - 9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Athens, Greece, 12-14 June 2023., 2023)
Confined masonry (CM) is one of the most popular and affordable earthquake-resistant con-struction technology for masonry structures. The reinforced concrete (RC) tie-columns in such construction play a crucial role in ...