Претраживање
Приказ резултата 1-10 од 101
Influence of slab deflection on the out-of-plane capacity of unreinforced masonry partition walls
(Engineering Structures, 2023)
Severe damage of non-structural elements is noticed in previous earthquakes, causing high economic losses and posing a life threat for the people. Masonry partition walls are one of the most commonly used non-structural ...
Performance of RC cast-in-place buildings during the November 26, 2019 Albania earthquake
(Bulletin of Earthquake Engineering, 2022)
This paper documents performance of cast-in-place reinforced concrete (RC) buildings in the Durrës municipality during Albania earthquake of November 26, 2019 (MW 6.4). Both mid- and high-rise RC buildings were affected ...
Seismic performance of an industrial multi-storey frame structure with process equipment subjected to shake table testing
(Engineering Structures, 2021)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of process equipment and multiple and simultaneous release of hazardous ...
Dynamic response of three-dimensional rigid and flexible foundations on layered soils with local inhomogeneities
(Elsevier, 2022)
The dynamic response of rigid and flexible three-dimensional (3D) foundations of arbitrary shape, placed on a homogeneous or layered halfspace, which may contain a finite, longitudinally invariant structure or inhomogeneity, ...
Progressive failure analysis of open-hole composite laminates using FLWT-SCB prediction model
(Elsevier, 2022)
This paper presents the original incorporation of the smeared crack band (SCB) damage model within the full layerwise theory (FLWT) framework, to contribute to the increase of the computational efficiency of the progressive ...
Generalized plasticity model for inelastic RCFT column response
(Elsevier Ltd, 2016)
This paper presents a nonlinear 3d concentrated plasticity beam column element for the analysis of RCFT columns. The element consists of a linear elastic component with a plastic hinge at each end whose inelastic response ...
Practical ANN prediction models for the axial capacity of square CFST columns
(Springer, 2023)
In this study, two machine-learning algorithms based on the artificial neural network
(ANN) model are proposed to estimate the ultimate compressive strength of square
concrete-filled steel tubular columns. The development ...
Influence of inter-panel connections on vibration response of CLT floors due to pedestrian-induced loading
(Engineering Structures, 2023)
Long-span cross-laminated timber (CLT) floors are typically an assembly of prefabricated CLT panels connected together on the site. The actual connections are commonly neglected in design calculations. Hence, a CLT floor ...
Influence of patch load length on strengthening effect in steel plate girders
(Journal of Constructional Steel Research, 2022)
The present paper aims to numerically investigate the influence of patch load length related to various geometric parameters on the patch loading resistance of steel plate girders. Geometric parameters such as the web ...
Design approach for cost-effective hybrid CLT floors
(Croatian Association of Civil Engineers, 2022)
There is a growing research and production interest for the application of lower-cost
hybrid cross-laminated timber (CLT) panels composed of timber layers of dissimilar quality.
Therefore, an approach for the design of ...