Претраживање
Приказ резултата 1-10 од 112
Experimental investigation of wind flow around low-rise tilted house
(Faculty of Civil Engineering Subotica, 2019)
An experimental investigation has been conducted in order to give insight into wind flow characteristics in urban areas, in particular, its effects on low-rise buildings. Analyses are based on the results from atmospheric ...
Experimental and Numerical analysis of RC Frames with decoupled masonry infills
(COMPDYN 2019 - 7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2019)
Masonry infill walls are commonly used in reinforced concrete (RC) frame structures, also in seismically active areas, although they often experience serious damage during earthquakes. One of the main reasons for their ...
Experimental and Numerical investigations of Reinforced Concrete Frames with Masonry infills under combined in- and out-of-plane seismic loading
(16th European Conference on Earthquake Engineering, 2018)
It is well known that seismically loaded reinforced concrete frames with masonry infills exhibit an unfavourable behaviour which can lead to serious damages of the masonry infill panels and the surrounding reinforced ...
Damage reduction system for masonry infill walls under seismic loading
(ICAAC ‐ 6th International Conference on Autoclaved Aerated Concrete, 2018)
Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all
over the world. Generally masonry infills are considered as nonstructural elements and thus are
typically neglected in the ...
Shear deformable dynamic stiffness elements for a free vibration analysis of composite plate assemblies - Part II: Numerical examples
(Elsevier Ltd, 2017)
The dynamic stiffness elements based on the HSDT and FSDT (and the corresponding dynamic stiffness matrices of a laminated composite plate) have been implemented into the original MATLAB code, and a variety of numerical ...
Free vibration analysis of curved spatial Bernoulli-Euler beam with circular cross section using isogeometric approach
(2019)
In this paper the linear free vibration analysis of an arbitrarily curved spatial Bernoulli – Euler beam with circular cross section using isogeometric approach has been presented. In order to carry out free vibration ...
Računarska geometrija sa 3D Modelovanjem
(Beograd: Akademska misao, 2015)
Из става рецензената: "Књига „Рачунарска геометрије са 3Д моделовањем“, аутора др Марије Обрадовић, резултат је вишегодишњег педагошког рада на предмету Рачунарска геометрија Одсека за геодезију и информатику Грађевинског ...
Section Discretization of Fiber Beam-Column Elements for Cyclic Inelastic Response
(Journal of Structural Engineering-Asce, 2012)
The paper presents studies of the effect of the number of material integration points at the monitored sections of fiber beam-column elements on the local response of typical structural cross sections under an extensive ...
An efficient beam-column element for nonlinear 3D frame analysis
(ECCOMAS Thematic Conference - COMPDYN 2011: 3rd International Conference on Computational Methods in, 2011)
A three-dimensional nonlinear beam-column element for the simulation of the global and local response of frames under monotonic and cyclic loading conditions is pre-sented. The element belongs to the group of concentrated ...
Generalized plasticity model for inelastic RCFT column response
(Elsevier Ltd, 2016)
This paper presents a nonlinear 3d concentrated plasticity beam column element for the analysis of RCFT columns. The element consists of a linear elastic component with a plastic hinge at each end whose inelastic response ...