Претраживање
Приказ резултата 51-60 од 93
Enhanced Arsenic Removal from Water by Activated Red Mud Based on Hydrated Iron(III) and Titan(IV) Oxides
(Chemical Engineering Communications, 2012)
In this study, acid heat-activated neutralized red mud (AB) was promoted as an efficient sorbent for the removal of inorganic arsenic from water. Three sorbents: neutralized red mud (Bauxsol), acid-treated Bauxsol (aBauxsol), ...
Computation of Thermal-Stresses and Contraction Joint Distance of RCC Dams
(Journal of Thermal Stresses, 2013)
A new approach in 3D numerical modeling for unsteady phased thermal-stress analysis of a massive concrete hydraulic structure is presented. The temperature field is computed first, providing a drive for the unsteady, ...
Improved Loop-Flow Method for Hydraulic Analysis of Water Distribution Systems
(American Society of Civil Engineers (ASCE), 2018)
Different methods have been developed in the past to formulate and solve steady-state hydraulics of a water distribution system (WDS). The most widely used method nowadays is probably the global gradient algorithm (GGA). ...
Hydrodynamic effects of debris blockage and scour on masonry bridges: Towards experimental modelling
(CRC Press/Balkema, 2016)
This paper describes the preliminary stage of an ongoing project investigating the hydrodynamic effects of debris blockage at masonry bridges. Debris blockage is cited as one of the primary causes of bridge failures in the ...
Can we use a simple modelling tool to validate stormwater biofilters for herbicides treatment?
(Taylor and Francis Ltd., 2018)
This study proposes a new stormwater biofilter validation approach, using a process-based model of micropollutant removal in stormwater biofilters. The model performance was assessed against in-situ challenge tests conducted ...
Conservation of resources in the pulp and paper industry derived from cleaner production approach
(Resources Conservation and Recycling, 2011)
This paper analyses the utilization of water and recycled fiber from waste paper for the production in one Serbian cardboard mill. Water and fiber consumption, wastewater generation and its characteristics, as well as ...
Calibration of a 1D/1D urban flood model using 1D/2D model results in the absence of field data
(Water Science and Technology, 2011)
Recently increased flood events have been prompting researchers to improve existing coupled flood-models such as one-dimensional (1D)/1D and 1D/two-dimensional (2D) models. While 1D/1D models simulate sewer and surface ...
A sustainability analysis of an incineration project in Serbia
(Waste Management & Research, 2013)
The only option for municipal solid waste (MSW) treatment adopted so far in Serbia is landfilling. Similarly to other south-eastern European countries, Serbia is not recovering any energy from MSW. Fifty percent of electricity ...
PID Controllers as Data Assimilation Tool for 1D Hydrodynamic Models of Different Complexity
(Springer, 2019)
Flood risks management is based on data obtained by different forecasts. Forecasts are often based on hydrological-hydrodynamic models. These models are calibrated using selected time-series from the past. However, even ...
Building a Sustainable Water Management System in the Republic of Serbia: Challenges and Issues
(American Chemical Society, 2015)
The Republic of Serbia is a good example of a developing country with a water management system that has not been adequately transitioned to address the need of the new socio-economic paradigm. Consequently, more than 30% ...