Pretraživanje
Prikaz rezultata 31-40 od 251
Laboratory investigation of hydraulic characteristics of fly ash as a fill material from the aspects of pollutant transport
(IWA Publishing, 2017)
Depending on the usage of fly ash, it is necessary to determine its environmental parameters, such as the potential for pollutant transport/leaching after its built-in. This study presents a methodology for determination ...
The validation of stormwater biofilters for micropollutant removal using in situ challenge tests
(Elsevier, 2014)
Stormwater harvesting is becoming a popular alternative water resource in water stressed regions. Stormwater biofilters have been recognized as being among the most promising pre-treatment technologies. In this study, a ...
A new methodology for flood damage assessment in urban areas / Nova metodologija za procenu šteta usled plavljenja urbanih površina
(Udruženje za tehnologiju vode i sanitarno inžinjerstvo, Beograd, 2010)
Urban flooding caused by extreme rainfall events is becoming considerably more frequent and more destructive. Thus, enhanced models to predict accurately flood magnitude and location are of paramount importance. These ...
Sensitivity Analysis of a Physically Based Distributed Model
(Springer Netherlands, 2016)
The objective of this study is to perform a sensitivity analysis of the SHETRAN model on the example of the torrential Lukovska River catchment in Serbia. The sensitivity analysis of the model was performed for the following ...
Validation of hydro-environmental data / Validacija podataka hidrotehničkih procesa
(Udruženje za tehnologiju vode i sanitarno inžinjerstvo, Beograd, 2010)
The knowledge about hydraulic and hydrologic processes is based on the monitoring of environmental and technical systems where they take place. The result of monitoring are the data that can be transformed into some useful ...
One example of creating flood risk maps in Serbia / Jedan primer kartiranja rizika od poplava u Srbiji
(Udruženje za tehnologiju vode i sanitarno inžinjerstvo, Beograd, 2014)
This paper deals with problems of creating flood risk maps, considering methodology and problems of its implementation in practice. A case study, pertaining to production of flood hazard and flood risk maps for municipality ...
Hidrotehničke osnove održivog razvoja irigacionih sistema u Republici Srpskoj / Hydraulic engineering for sustainable development of irrigation systems in the Republika Srpska
(Srpsko društvo za odvodnjavanje i navodnjavanjeAkademija inženjerskih nauka Srbije, 2020)
Proizvodnja hrane bi trebalo da bude osnova i pokretač razvoja privrede Republike Srpske, ali raspoloživi polјoprivredni i vodni resursi nisu dovolјno iskorišćeni. Na području ključnih makroparcela uz rijeku Savu evidentan ...
Towards harmonisation of image velocimetry techniques for river surface velocity observations
(Copernicus Publications, 2020)
Since the turn of the 21st century, image-based velocimetry techniques have become an increasingly popular approach for determining open-channel flow in a range of hydrological settings across Europe and beyond. Simultaneously, ...
Stepenasti preliv sa odbojnom gredom
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2010)
The stepped spillway with baffle as an overflow section of the small retention dams is presented. This is an original structure, designed as a stepped spillway, with bottom outlets and the modified USBR VI stilling basin ...
Estimation of riverbed clogging layer filtration characteristics based on aquifer pumping test / Procena filtracionih karakteristika kolmirajućeg sloja rečnog dna na osnovu rezultata testa probnog crpljenja
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2017)
Design of drainage wells is one of the most commonly used methods for groundwater dewatering where number of required wells and their capacity has to be designed. Asside the aquifer filtration properties, river water level ...