Search
Now showing items 71-80 of 165
Enhanced Arsenic Removal from Water by Activated Red Mud Based on Hydrated Iron(III) and Titan(IV) Oxides
(Chemical Engineering Communications, 2012)
In this study, acid heat-activated neutralized red mud (AB) was promoted as an efficient sorbent for the removal of inorganic arsenic from water. Three sorbents: neutralized red mud (Bauxsol), acid-treated Bauxsol (aBauxsol), ...
Planning and Suitability Assessment of Large-scale Nature-based Solutions for Flood-risk Reduction
(Water Resources Management, 2021)
Adverse effects of climate change are increasing around the world and the floods are
posing significant challenges for water managers. With climate projections showing
increased risks of storms and extreme precipitation, ...
Computation of Thermal-Stresses and Contraction Joint Distance of RCC Dams
(Journal of Thermal Stresses, 2013)
A new approach in 3D numerical modeling for unsteady phased thermal-stress analysis of a massive concrete hydraulic structure is presented. The temperature field is computed first, providing a drive for the unsteady, ...
Improved Loop-Flow Method for Hydraulic Analysis of Water Distribution Systems
(American Society of Civil Engineers (ASCE), 2018)
Different methods have been developed in the past to formulate and solve steady-state hydraulics of a water distribution system (WDS). The most widely used method nowadays is probably the global gradient algorithm (GGA). ...
Hydrodynamic effects of debris blockage and scour on masonry bridges: Towards experimental modelling
(CRC Press/Balkema, 2016)
This paper describes the preliminary stage of an ongoing project investigating the hydrodynamic effects of debris blockage at masonry bridges. Debris blockage is cited as one of the primary causes of bridge failures in the ...
Can we use a simple modelling tool to validate stormwater biofilters for herbicides treatment?
(Taylor and Francis Ltd., 2018)
This study proposes a new stormwater biofilter validation approach, using a process-based model of micropollutant removal in stormwater biofilters. The model performance was assessed against in-situ challenge tests conducted ...
Water level and discharge measurements in: Metrology in Urban Drainage and Stormwater Management: Plug and Pray
(IWA Publishing, 2021)
The knowledge of water levels and discharges in urban drainage and stormwater management (UDSM) systems is of key importance to understand their functioning and processes, to evaluate their performance, and to provide data ...
Conservation of resources in the pulp and paper industry derived from cleaner production approach
(Resources Conservation and Recycling, 2011)
This paper analyses the utilization of water and recycled fiber from waste paper for the production in one Serbian cardboard mill. Water and fiber consumption, wastewater generation and its characteristics, as well as ...
Calibration of a 1D/1D urban flood model using 1D/2D model results in the absence of field data
(Water Science and Technology, 2011)
Recently increased flood events have been prompting researchers to improve existing coupled flood-models such as one-dimensional (1D)/1D and 1D/two-dimensional (2D) models. While 1D/1D models simulate sewer and surface ...