Pretraživanje
Prikaz rezultata 1-4 od 4
Capturing dam geometry by Lidar and multibeam technology for visualization of structural deformations - Case study Dam Bečej
(Department of Surveying, Faculty of Civil Engineering, Slovak University of Technology in BratislavaCroatian Geodetic Society, ZagrebFaculty of Geodesy, University of Zagreb, Croatia, 2020)
Bečej Dam is a concrete dam on the Tisa River, which has been monitored since the 1980s through the monitoring of point-mark position vector changes on the dam body in 2D and 1D coordinate system. Conventional geodetic ...
TLS-based 3D Deformation Monitoring of Church Bell Tower Geometry
(INGEO & SIG 2020, 2020)
Unlike traditional methods, terrestrial laser scanning (TLS) enables one to collect enormous amount of data in a fairly short time, consequently reducing field efforts. This backed up the decision to employ TLS for deformation ...
Influence of Given Parameter Errors on Accuracy of Tunnel Breakthrough by Height
(Contributions to International Conferences on Engineering Surveying, 2020)
There are two types of geodetic 2D and 1D networks for tunnel construction: overhead and underground. The purpose of these networks is to perform tunnel stake out with allowable deviation in transverse, longitudinal and ...
Monitoring active landslide at Umka settlement using UAV photogrammetry
(UNIVERSITY OF MONTENEGRO, FACULTY OF CIVIL ENGINEERING -THE 7th INTERNATIONAL CONFERENCE "CIVIL ENGINEERING - SCIENCE AND PRACTICE", 2020)
The basic idea of the paper is to use UAV photogrammetry for monitoring landslide activities at Umka. The paper describes the monitoring of changes during one year. Two landslide epochs were studied at Umka in the spring, ...