Приказ основних података о документу
Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk (Teil 1)
Design of reinforced concrete enclosures infilled with clay block masonry (Part 1)
dc.creator | Butenweg, C. | |
dc.creator | Marinković, Marko | |
dc.creator | Kubalski, Thomas | |
dc.creator | Fehling, E. | |
dc.creator | Pfetzing, T. | |
dc.creator | Meyer, U. | |
dc.date.accessioned | 2019-04-19T14:29:09Z | |
dc.date.available | 2019-04-19T14:29:09Z | |
dc.date.issued | 2018 | |
dc.identifier.issn | 0341-0552 | |
dc.identifier.uri | https://grafar.grf.bg.ac.rs/handle/123456789/918 | |
dc.description.abstract | Within the scope of the joint European project INSYSME, the German partners developed two systems - IMES and INODIS - for improving the seismic behaviour of masonry infilled reinforced concrete frames. The purpose of both systems is to decouple frame and infill instead of working to improve their load-bearing capacity by means of elaborate, expensive, supplementary reinforcing elements. Initial findings for the IMES system with regard to the loads acting in-plane and perpendicular to the wall plane (out-of-plane) are presented. | en |
dc.publisher | Bauverlag BV GmbH | |
dc.rights | restrictedAccess | |
dc.source | ZI, Ziegelindustrie International/Brick and Tile Industry International | |
dc.title | Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk (Teil 1) | de |
dc.title | Design of reinforced concrete enclosures infilled with clay block masonry (Part 1) | en |
dc.type | article | |
dc.rights.license | ARR | |
dc.citation.epage | 39 | |
dc.citation.issue | 4 | |
dc.citation.other | (4): 30-39 | |
dc.citation.spage | 30 | |
dc.identifier.rcub | https://hdl.handle.net/21.15107/rcub_grafar_918 | |
dc.identifier.scopus | 2-s2.0-85052805938 | |
dc.type.version | publishedVersion |
Документи
Датотеке | Величина | Формат | Преглед |
---|---|---|---|
Уз овај запис нема датотека. |