Претраживање
Приказ резултата 1-10 од 68
Recommendation of RILEM TC 264 RAP on the evaluation of asphalt recycling agents for hot mix asphalt
(Springer, 2022)
This recommendation is based on the results of an inter-laboratory study organised by the RILEM technical committee TC 264-RAP "Asphalt Pavement Recycling"—Task Group 3 (TG3) focusing on Asphalt Binder for Recycled Asphalt ...
Shear resistance of headed shear studs welded on welded plates in composite floors
(Elsevier Ltd., 2019)
The present paper deals with composite steel-concrete floor with headed shear studs welded onto a flat steel plate. In bridges applications, which are the focus of the paper, very thick steel plates are often combined with ...
Comprehensive review of the structural behaviour and numerical modelling of recycled aggregate concrete-filled steel tubes
(Elsevier, 2024)
This paper summarises current research findings related to the behaviour and simulation of a relatively new type
of structural component: recycled aggregate concrete-filled steel tube columns (RACFST). The first part of ...
Planning and Suitability Assessment of Large-scale Nature-based Solutions for Flood-risk Reduction
(Water Resources Management, 2021)
Adverse effects of climate change are increasing around the world and the floods are
posing significant challenges for water managers. With climate projections showing
increased risks of storms and extreme precipitation, ...
Unfavorable geometric imperfections in steel plate girders subjected to localized loads
(Elsevier, 2021)
Recent experimental studies have shown that the current EN1993-1-5 patch loading resistance model underestimates the ultimate strength of steel plate girders in certain cases, especially for longitudinally stiffened steel ...
Weighted P-partitions enumerator
(Applicable Analysis and Discrete Mathematics, 2021)
To an extended generalized permutohedron we associate the weighted integer points enumerator, whose principal specialization is the f-polynomial. In the case of poset cones it refines Gessel's P-partitions enumerator. We ...
Dynamic response of three-dimensional rigid and flexible foundations on layered soils with local inhomogeneities
(Elsevier, 2022)
The dynamic response of rigid and flexible three-dimensional (3D) foundations of arbitrary shape, placed on a homogeneous or layered halfspace, which may contain a finite, longitudinally invariant structure or inhomogeneity, ...
Design criteria for pin-ended hot-rolled and laser-welded stainless steel equal-leg angle columns
(Thin-Walled Structures, 2021)
This paper explores an attempt to investigate the structural behaviour and design of equal-leg stainless steel angle columns fabricated by the laser-welding of individual hot-rolled plates and by hot-rolling process. The ...
Three-dimensional stress analysis and design of cross-laminated timber panels using full-layerwise-theory-based finite element method
(Elsevier, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering, as full size walls or light floor structures. Due to their low environmental impact, excellent thermal ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...