Pretraživanje
Prikaz rezultata 41-50 od 184
Past, present and future of fly ash in concrete
(Macedonian Association of Structural Engineers, 2019)
The use of fly ash in concrete lasts for almost a century. The first idea of using concrete as a place to
deposit fly ash and merely reduce the amount of waste came a long way to a today’s use of fly ash as a
basic ...
Vertical Vibrations of 3D Structure Caused by Moving Load
(2012)
This paper presents a numerical study of the dynamic response of 3D structure subjected to a vertical moving load, including soil structure interaction. The dynamic system consists of two substructures, the soil and the ...
Innovative System for Earthquake Resistant Masonry Infill Walls
(16th European Conference on Earthquake Engineering, 2018)
Severe damages of masonry infill walls in reinforced concrete and steel frames have been observed after many earthquakes. Typically, masonry infill walls are loaded not just in-plane and out-of-plane but also simultaneously ...
Land-use suitability analysis of Belgrade city suburbs using machine learning algorithm
(Institute of geoinformatics VŠB - Technical University of Ostrava, 2013)
This paper treats development issues of the suburban areas of Belgrade city. A considerable growth that the city had experienced has led to excessive consumption of land and also to degradation of the landscape and loss ...
Self-Compacting Concrete With Industrial Byproducts
(Univerzitet u Bihaću, Tehnički fakultet, 2017)
The use of industrial by-products, such as fly ash and recycled concrete, in building industry presents one of the ways to improve the effect of this branch of industry on environment. Experimental investigation shown in ...
Influence of bio-based additives on RAP clustering and asphalt binder rheology
(CRC Press, Athens, Greece, 2017)
Effects of natural zeolite addition to lime based render layers for restoration of historical buildings
(RILEM Publications S.A.R.L., 2019)
Renders, as the most exposed elements of historical buildings, have limited durability therefore their periodical inspection and replacements are necessary. Various studies have been made with a purpose to develop renders ...
Impedance matrix for four adjacent rigid surface foundations
(European Association for Structural Dynamics, 2014)
In this paper, a frequency dependent impedance matrix for four adjacent rigid foundations resting on the viscoelastic halfspace is presented. The frequency dependent impedance matrix is developed using the integral transform ...
The application of new slope survey technologies in geotechnics
(STEF92 Technology Ltd., 2013)
This paper presents two examples of advanced methods of slope imaging on the main road M-22 near the town of Ljig. The slope survey mapping for the research, design and mitigation purposes is still being done using traditional ...
Geometric Redesign of the Subdivided Surface of CC II: Application In Architecture
(Bucharest, Romania: SORGING–ROMANIAN SOCIETYFORENGINEERINGGRAPHICS, 2019)
The concave polyhedral surface of CC II can be used as a structural template for architectural design of domes, roofs or other covering or stand-alone structures. Subdivision of CC II faces in geometrically defined way can ...