Pretraživanje
Prikaz rezultata 21-30 od 883
An efficient beam-column element for inelastic 3D frame analysis
(Springer Netherland, 2013)
Beam-column elements with section resultant plasticity for the hysteretic behavior of the end plastic hinges are widely used for numerical simulations in earthquake engineering practice because of the good compromise between ...
Computation of Thermal-Stresses and Contraction Joint Distance of RCC Dams
(Journal of Thermal Stresses, 2013)
A new approach in 3D numerical modeling for unsteady phased thermal-stress analysis of a massive concrete hydraulic structure is presented. The temperature field is computed first, providing a drive for the unsteady, ...
Resistance of cold-formed built-up stainless steel columns - Part I: Experiment
(Elsevier Ltd, 2018)
Nowadays, the codified procedure for design of centrically compressed cold-formed stainless steel (CFSS) builtup members is absent in Europe. Besides, there are no published research information and experimental data in ...
Strength of composite flysch samples under uniaxial compression
(Springer Verlag, 2018)
This paper presents the results of uniaxial compression strength tests performed on samples composed of sandstone and siltstone discs. Samples are loaded until failure, with the aim of determining the dependency between ...
On computational aspects of data processing of geodetic networks with large number of unknown parameters / O računskim aspektima obrade podataka geodetskih mreža s velikim brojem nepoznatih parametara
(Geodetski list, 2011)
Some special characteristics of linear systems of equations, which arise from geodetic network adjustment, optimization and pre-analysis, are outlined in this paper. Advantages and disadvantages of several methods for ...
Analysis based on the energy release rate criterion of a dynamically growing crack approaching an interface
(SAGE Publications Ltd, 2016)
A problem of a dynamically growing crack, which is approaching an interface between the two elastic isotropic materials at an arbitrary angle, is considered in this paper. That crack could behave in three ways: (i) it can ...
Concepts for improving machine learning based landslide assessment
(Springer Netherlands, 2019)
The main idea of this chapter is to address some of the key issues that were recognized in Machine Learning (ML) based Landslide Assessment Modeling (LAM). Through the experience of the authors, elaborated in several case ...
Supercritical flow in circular conduit bends
(Taylor and Francis Ltd., 2015)
A complex flow pattern occurring in a circular conduit bend with supercritical flow has been studied. The main objective was to obtain reliable criteria for prediction of the onset of helical and choking flow, in order to ...
Bridge quality control using Bayesian net
(International Association for Bridge and Structural Engineering (IABSE), 2019)
Bridge quality, as a measure of its compliance with the performance goals is tracked by the quality control plan. In other words, the quality could be understood as a comparison between performance indicators and performance ...
Cost-oriented analysis of fibre reinforced concrete column-supported flat slabs construction
(Journal of Building Engineering, 2022)
Fibre reinforced concrete (FRC) is increasingly being used in elements with high structural responsibility, the constructed FRC column-supported flat slabs (CSFSs, hereinafter) with partial or even total substitution of ...