Search
Now showing items 31-40 of 316
Numerical analysis of reinforced concrete frame buildings with decoupled infill walls
(Building materials and structures, 2020)
Reinforced concrete (RC) buildings with masonry infill walls are widely used in many countries all over the world. Although infills are considered as non-structural elements, they significantly change dynamic characte-ristics ...
Comparisson between damage development on composite and standardized mortar specimens exposed to soluble salts
(Proceedings of SWBSS 2021 Fifth International Conference on Salt Weathering of Buildings and Stone Sculptures, 2021)
Salt crystallization of lime-based rendering mortars is one of the most common reasons for their deterioration. Still, testing of the resistance to soluble salt action has not yet been standardized for this type of material. ...
Velocity field and discharge measurements at the turbine inlet of Iron Gate 2 hydropower plant
(European Geosciences Union/Copernicus Publications, 2021)
To define the performance characteristics of turbines in Hydropower Plants (HPP) accurate hydraulic, mechanical and electrical quantities are needed. The discharge is the most difficult quantity to measure and assess its ...
A New Fractal Approach to Account for Capillary and Adsorption Phenomena in the Water Retention and Transfer Properties of Unsaturated Soils
(Wiley, 2020)
To describe the water retention and transfer properties of an unsaturated soil over the whole range of matric suction, it is necessary to account for both capillary and adsorption phenomena. Existing models combine well-known ...
Evaluation of Concrete Cover Depth for Green Concretes Exposed to Carbonation
(John Wiley & Sons Ltd, 2020)
Carbonation resistance of fly ash concrete (FAC) and recycled aggregate concrete (RAC) has been extensively tested in the past decade, but there are still no recommendations for their application in codes of practice. ...
Development of frequency curves for cross-laminated timber (CLT) floors using dynamic stiffness method
(European Association for Structural Dynamics, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering practice, as full size walls or floor structures. CLT provides a compelling alternative to the concrete and ...
Primena mašinskog učenja za procenu cena i količina radova pri izgradnji stambenih i stambeno-poslovnih objekata
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", 2021)
Ovaj rad se bavi problemom procena potrebnih količina radova, kao i koštanja izgradnje stambenih i stambeno-poslovnih objekata korišćenjem algoritama mašinskog učenja. Osnovni cilj je analiza mogućnosti primene mašinskog ...
New Downscaling Approach Using ESA CCI SM Products for Obtaining High Resolution Surface Soil Moisture
(MDPI, 2020)
ESA CCI SM products have provided remotely-sensed surface soil moisture (SSM) content with the best spatial and temporal coverage thus far, although its output spatial resolution of 25 km is too coarse for many regional ...
Report on application of sectorization method for creation of District Meter Areas (DMAs) within the water distribution network of the city of Amsterdam
(The University of Sheffield., 2020)
The subject of this report is presentation of abilities of sectorization algorithm to identify and create District Meter Areas (DMAs) within the water distribution network of the city of Amsterdam.
District Meter Area ...