Search
Now showing items 1-10 of 279
Glulam beams reinforced with internally positioned CFRP plates
(MASE - Macedonian Association of Structural Engineers, Faculty of Civil Engineering, Skopje, Republic of Macedonia, 2015)
In recent years the use of fiber reinforced polymer (FRP) composites for strengthening and repairing structural members has significantly increased. This paper presents an experimental study carried out in order to investigate ...
Estimation of vertical accuracy of digital terrain model FABDEM on the territory of the republic of Serbia
(SGEM, 51 Alexander Malinov blvd, Sofia, 1712, Bulgaria, 2022)
In 2004, a digital terrain model (DTM) was created in Serbia. It was obtained by vectorizing isohypses on topographic maps with a scale of 1: 25000. The resolution of the digital model of Serbia is 30 m, and the vertical ...
Investigation of the seismic behaviour of structural and non-structural components in industrial facilities by means of shaking table tests
(SEDIF 2020 – 2nd International Conference on Seismic Design of Industrial Facilities, 2020)
Industrial facilities consist of the primary load-carrying structure and various process engineering components (secondary structures), which under seismic loading, may exhibit significant damage that may threaten their ...
A novel approach in numerical simulation of contaminant removal by air sparging
(Water Science and Technology: Water Supply, 2007)
The paper presents a mechanistic/deterministic model for simulation of mass removal during air sparging. From the point of numerical modeling, there are two issues considering air sparging: modeling of air flow and ...
Laminar composite materials damage monitoring by embedded optical fibers
(Kluwer Academic Publishers, 2006)
Innovative System for Earthquake Resistant Masonry Infill Walls
(16th European Conference on Earthquake Engineering, 2018)
Severe damages of masonry infill walls in reinforced concrete and steel frames have been observed after many earthquakes. Typically, masonry infill walls are loaded not just in-plane and out-of-plane but also simultaneously ...
Land-use suitability analysis of Belgrade city suburbs using machine learning algorithm
(Institute of geoinformatics VŠB - Technical University of Ostrava, 2013)
This paper treats development issues of the suburban areas of Belgrade city. A considerable growth that the city had experienced has led to excessive consumption of land and also to degradation of the landscape and loss ...
Structural rehabilitation and stabilization of Smederevo fortress Tower 11
(BULGARIAN ACADEMY OF SCIENCE AND ARTS Scientific Institute for Architecture, Construction and Urban Planning, 2017)
This paper presents the structural rehabilitation and stabilization of Tower 11 of Smederevo fortress. The tower is tilted for about 1.8 m towards its outer edge, that is, towards the surrounding vertical walls that it was ...
Basic kinematic analysis of rock slope using terrestrial 3D laser scanning on the M-22 highroad pilot site
(Taylor & Francis Group, London, 2013)
Terrestrial laser scanning has propelled recent advancements in rock slope engineering. Building models with millions of points to discretize an actual slope has provided resolutions which empower computerbased ...
Comparisson between damage development on composite and standardized mortar specimens exposed to soluble salts
(Proceedings of SWBSS 2021 Fifth International Conference on Salt Weathering of Buildings and Stone Sculptures, 2021)
Salt crystallization of lime-based rendering mortars is one of the most common reasons for their deterioration. Still, testing of the resistance to soluble salt action has not yet been standardized for this type of material. ...