Претраживање
Приказ резултата 11-20 од 40
Horizontal coordinates transformation and residuals modelling on the territory of the Republic of Srpska
(Taylor & Francis, 2020)
The paper describes the optimal model for coordinate transformation between ETRS89 and old national reference system in the Republic of Srpska. The Helmert`s parameters were estimated, based on a set of 1 741 common points. ...
Numerical study of vibrations induced by horizontal-axis wind turbine on a steel building
(Proceedings of the Institution of Civil Engineers - Structures and Buildings, 2019)
One of the most important acceptance issues regarding the implementation of small-scale wind turbines in urban environments is related to human comfort. Turbine-induced vibrations can have a large influence on small-scale ...
A comparative environmental impact analysis of asphalt mixtures containing Crumb Rubber and Reclaimed Asphalt Pavement using Life Cycle Assessment
(Taylor&Francis, 2019)
Recently, the reduction of the environmental burdens related to highway infrastructures has been in the spotlight. Within this context, the use of recycled materials in bituminous mixtures for road pavement construction ...
Fatigue Resistance of a Grid-Reinforced Asphalt Concrete using Four Point Bending Beam Test
(CRC Press/Balkema, 2019)
This paper presents an experimental study of the influence of a reinforcement system on fatigue resistance of asphalt concrete. For purpose of this research, unreinforced and grid-reinforced asphalt specimens were tested. ...
Coupled groundwater hydrodynamic and pollution transport modelling using Cellular Automata approach
(Journal of Hydrology, 2019)
High urbanization puts many groundwater resources at risk of quality deterioration. Analyzing all viable potential groundwater contamination scenarios for good decision making requires reliable tool. Coupling several complex ...
Influence of Loading Cracks on the Carbonation Resistance of RC elements
(Elsevier, 2019)
In reinforced concrete (RC) structures, carbonation induced corrosion is one of the most significant durability issues. A very important factor that affects the carbonation process is the appearance of cracks in RC structures. ...
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
On the influence of resonance photon scattering on atom interference
(Physica Scripta, 2010)
Here, the influence of resonance photon-atom scattering on the atom interference pattern at the exit of a three-grating Mach-Zehnder interferometer is studied. It is assumed that the scattering process does not destroy the ...
Behaviour of duplex stainless steel bolted connections
(Thin-Walled Structures, 2021)
This study deals with the behaviour of duplex stainless steel bolted connections. The aim of the study is torespond to the question if the current stainless steel design specifications are able to predict the behaviourof ...