Претраживање
Приказ резултата 41-50 од 135
SPH method / Rešavanje jednačina kretanja fluida metodom zasnovanom na praćenju fluidnih delića (SPH metoda)
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2014)
The SPH (Smoothed Particle Hydrodynamics) method for solving fluid dynamics equations is presented in this paper. The main aim of this paper is to present theoretical aspects of the method which is used in numerical modelling ...
Comparative analysis of the results obtained with 3d orthogonal and non-orthogonal grids in the 3d-flow models: Part 1 / Uporedna analiza rezultata dobijenih primenom ortogonalnih ineortogonalnih mreža u modelima prostornog tečenja - deo l
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2006)
Application of orthogonal and non-orthogonal grids in numerical models of the three-dimensional flow is considered. A river confluence is chosen as an example due to strong three-dimensional flow effects occurring at the ...
Prikaz modela nezavisnih segmenata za proračun linijskog tečenja u koritu za veliku vodu
(Srpsko društvo za odvodnjavanje i navodnjavanje, 2019)
Cilj ovog rada je da našu stručnu javnost upozna sa još jednim modelom za proračun linijskog tečenja u koritu za veliku vodu koji, u proračunu gubitaka energije osim trenja, uzima u obzir i razmenu količine kretanja između ...
Procena krive protoka i rekonstrukcija poplavnog talasa u dubokom koritu sa uskim plavnim površinama / Estimation of the stage-discharge curve and reconstruction of the flood hydrograph in a deep river channel with narrow floodplains
(Srpsko društvo za odvodnjavanje i navodnjavanje, 2021)
U ovom radu razmatra se svrsishodnost primene metode razmene količine kretanja za procenu krive protoka i rekonstrukciju talasa velikih voda u dubokim koritima za veliku vodu koja imaju uske plavne površine. Ovo pitanje ...
Compiled free surface mathematical models uncertainty propagation / Propagacija neodređenosti kod linijskih modela otvorenih tokova
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2009)
Free surface flow is usually simulated by 1D numerical models. This approach assumes flow simplification and requires model calibration in order to reproduce flow characteristics in a realistic way. The calibration and ...
Flood frequency analysis at gauged sites: Need for a change in approach / Statistička analiza velikih voda na profilima hidroloških stanica - potreba za promenom pristupa
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2014)
In most developed countries, practices and research results are translated into standards or guidelines for flood flow assessment, usually with the compulsory application in the design and exploitation of hydraulic structures ...
Assessment of the position and dimensions of the ski-jump scour-hole / Procena položaja i dimenzija erozione jame ski odskoka
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2006)
This paper is concerned with the ski-jump design, mainly for the large overflow dams. Although the vast scope of literature on this subject exists, there is still a need to compile, elaborate and upgrade available knowledge. ...
Dynamical monitoring of deformation structures in real time / Dinamičko praćenje deformacionih struktura u realnom vremenu
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2004)
Deformation of structures are results of the various processes. Measurements techniques which used today give more opportunities for good processes analyses. The importance of getting advanced techniques is in accordance ...
Methodology for sequent depth estimation for converging stepped-chute stilling basins / Metodologija proračuna spregnutih dubina kod umirujućih bazena neprizmatičnih stepenastih brzotoka
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2016)
The influence of converging stepped spillways on the dimensions of the stilling basins for RCC dams was examined, based on the results of physical modeling, existing empirical expressions, and basic laws of fluid mechanics ...
Physical methods for waste water treatment: The use of freeze/thaw method with the assistance of microwave radiation for oily water treatment / Fizičke metode za prečišćavanje otpadnih voda - primena metode naizmeničnog mržnjenja i hlađenja i mikrotalasnog zagrevanja za obradu zauljenih voda
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2005)
The main sources of oily waste water are oil- refineries, metal industry and food industry. Any technological process that uses emulsions has to take into consideration also the treatment of the used emulsions. The ultimate ...