Pretraživanje
Prikaz rezultata 21-30 od 95
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
Influence of cracks on concrete carbonation resistance
(University of Montenegro Faculty of Civil Engineering, 2020)
In reinforced concrete (RC) structures carbonation induced corrosion is one of the biggest durability issue. There are many factors that affect carbonation process (CO2 concentration, relative humidity, temperature, curing ...
Out-of-plane behaviour of loadbearing and non-structural masonry walls during recent earthquakes
(University of Zagreb ,Faculty of Civil Engineering, 2021)
Recent earthquakes in Balkan, including the September 21 and November 26, 2020 Albania
earthquakes, March 22, 2020 Zagreb earthquake, and the December 29, 2020 Petrinja, Croatia
earthquakes had devastating consequences ...
The new buckling curves for cold-formed stainless steel equal-leg angle columns
(Univerzitet u Beogradu Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
Pravila za proračun centrično pritisnutih elemenata ravnokrakog L poprečnog preseka od
nerđajućeg čelika nisu eksplicitno definisana u važećem evropskom standardu SRPS EN 1993-
1-4. Ovaj rad ukratko prikazuje ...
High temperature materials: properties, demands and applications
(Association of Chemical Engineers of Serbia, 2020)
High-temperature materials are used in a wide range of industries and applications such as gas turbine engines for aircrafts, power and nuclear power plants, different types of furnaces, including blast furnaces, some fuel ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...
Review of basic concepts of contact mechanics of frictionless contact with emphasis on penalty method
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Problems involving contact are of great importance in industry related to mechanical and civil
engineering, but also in biomechanics and other applications. The contact interaction between
surfaces and different bodies ...
Behaviour of stainless steel plain channel section columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability of cold-formed stainless steel plain channel columns under axial compression is investigated. Reliable finite element models for channel section columns are first ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Bolted connectors with mechanical coupler embedded in concrete: Shear resistance under static load
(Techno Press, 2020)
Contemporary design and construction of steel-concrete composite structures employs the use of prefabricated concrete elements and demountable shear connectors in order to reduce the construction time and costs and enable ...