Претраживање
Приказ резултата 11-20 од 54
The new buckling curves for cold-formed stainless steel equal-leg angle columns
(Univerzitet u Beogradu Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
Pravila za proračun centrično pritisnutih elemenata ravnokrakog L poprečnog preseka od
nerđajućeg čelika nisu eksplicitno definisana u važećem evropskom standardu SRPS EN 1993-
1-4. Ovaj rad ukratko prikazuje ...
Application of Genetic Algorithm in design of arch bridge
(Građevinski fakultet Subotica, 2021)
Topic of this article is application of Genetic Algorithm (GA) as a method of
global optimization for determining characteristic dimensions of arch concrete bridge.
Implementation of genetic algorithm for designing ...
The Behaviour of Shear Anchors with Different Grout Properties
(Ernst&Sohn, 2021)
During the assembling of a steel structure with anchors, grout should be used in connections be-
tween steel elements and a reinforced concrete support element. In horizontal and vertical joints,
grout is used as a good ...
Experimental response of hot-rolled stainless steel angle columns
(Thin-Walled Structures, 2021)
This paper reports on experiments addressing the buckling and collapse behaviour of pin-ended hot-rolled stainless steel equal-leg angle columns under pure axial compression, aiming to provide reliable experimental data ...
Experimental study of laser-welded stainless steel angle columns
(Thin-Walled Structures, 2021)
Substantial research has been conducted in the last years into the structural responses of cold-formed and hot-rolled stainless steel equal-leg angle columns, whereas there is no experimental data on laser-welded stainless ...
Effect of accelerated carbonation on the efficiency of immobilization of Cs in the alkaliactivated blast furnace slag
(Slovenian National Building and Civil Engineering Institute (ZAG), 2021)
In this paper the effect of accelerated carbonation process on the effectiveness of immobilization of cesium (simulated radioactive and toxic waste) in the alkali-activated blast furnace slag (AABFS) matrix was studied. ...
Stability design criteria for closely spaced built-up stainless steel columns
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
This paper aims to develop design recommendations for closely spaced built-up stainless steel columns, based on findings gained in performed research at the University of Belgrade. The research focuses on pin-ended built-up ...
Design of frp strengthened masonry structures
(Univerzitet u Beogradu Građevinski fakultet, 2021)
Masonry structures are prone to different types of damages caused by overloading, design or
construction errors, durability problems, accidental loading. Depending on the extent of
damages, failure of masonry structures ...
Analysis of modal properties of two nominaly identical turbine supporting structures
(Association of Sructural Engineering of Serbia - Symposium 2020, 2021)
The paper presents study of modal parameters identification of two turbine supporting structures of unit-A1 and unit-A2 in Power Plant Nikola Tesla – A in Obrenovac – Republic of Serbia, based on ambient vibration measurements. ...
Shear provisions for concrete structures according to en 1992-1-1: open issues / Контрола на смицање бетонских конструкција према ен 1992-1-1: отворена питања
(Univerzitet z Novom Sadu; Građevinski Fakultet Subotica, 2021)
The design of concrete members for shear without stirrups, except for the
minimum required, has become a major issue worldwide. It was noticed that the shear
capacity of concrete element according to the Eurocode 2 often ...