Search
Now showing items 1-10 of 15
Closure to “Supercritical flow in circular conduit bends”
(Journal of Hydraulic Research, 2016)
Bolted shear connectors vs. headed studs behaviour in push-out tests
(Journal of Constructional Steel Research, 2013)
Prefabrication of concrete slabs reduces construction time for composite steel-concrete buildings and bridges. Different alternatives for shear connectors (bolts and headed studs) are analysed here to gain better insight ...
Punching failure mechanism at edge columns of post-tensioned lift slabs
(Engineering Structures, 2008)
A test program designed to evaluate the punching shear strength of unbonded post-tensioned lift flat slabs at edge columns is described. Three isolated specimens, which represented a part of the edge panel in the vicinity ...
On the selection of the functional unit in LCA of structural concrete
(Springer Verlag, 2017)
Understanding the carbonation of concrete with supplementary cementitious materials: a critical review by RILEM TC 281-CCC
(Springer, 2020)
Blended cements, where Portland cement clinker is partially replaced by supplementary cementitious materials (SCMs), provide the most feasible route for reducing carbon dioxide emissions associated with concrete production. ...
Comparative environmental assessment of natural and recycled aggregate concrete
(Waste Management, 2010)
Constant and rapid increase in construction and demolition (C&D) waste generation and consumption of natural aggregate for concrete production became one of the biggest environmental problems in the construction industry. ...
Flexural reinforcement of glulam beams with CFRP plates
(Kluwer Academic Publishers, 2016)
In recent years the use of fiber reinforced polymer composites for strengthening and repairing structural elements has significantly increased. This paper shows an experimental study carried out in order to demonstrate the ...
Resistance of cold-formed built-up stainless steel columns - Part II: Numerical simulation
(Elsevier Ltd, 2018)
In parallel with an experimental investigation of the flexural buckling behaviour of built-up stainless steel columns presented in the accompanying paper (Dobric et al., submitted for publication), a detailed Finite Element ...
Resistance of cold-formed built-up stainless steel columns - Part I: Experiment
(Elsevier Ltd, 2018)
Nowadays, the codified procedure for design of centrically compressed cold-formed stainless steel (CFSS) builtup members is absent in Europe. Besides, there are no published research information and experimental data in ...
Behaviour of stainless steel press-braked channel sections under compression
(Elsevier Ltd, 2017)
This paper describes an experimental and numerical investigation of stainless steel material response and behaviour of press-braked channel sections under pure axial compression. A material test programme that covers ...