Претраживање
Приказ резултата 261-270 од 279
Effect of Mixing Approach on the Properties of Concrete with Different Aggregate Types
(Academy of Sciences and Arts of the Republic of Srpska, Bana Lazarevića 1, 78000 Banja Luka, Republic of Srpska, B&H, 2022)
The subject of the experimental tests presented in the paper is the influence of the mixing method on the physical and mechanical properties of fine-grained concrete with the nominally largest aggregate grain of 8 mm. ...
The new buckling curves for cold-formed stainless steel equal-leg angle columns
(Building Materials and Structures, 2021)
The design rules for centrically compressed stainless steel equal-leg angle
members are not explicitly stated in the current European standard SRPS EN 1993-
1-4. This paper summarizes the results of extensive ...
Embedment test of wood for dowel-type fasteners
(Wood Research, 2012)
The mechanical performances of timber joints are particularly important for timber engineers involved in the design of timber structures. Embedding properties are thought to be of great importance for any dowel-type timber ...
Methods for Life Extension of Multi-Storey Car Park Buildings
(Taylor and Francis, 2022)
Multi-storey car park buildings with steel–concrete composite floor structures are widespread in construction due to the distinct benefits of the implemented structural system. Although there are various possibilities for ...
Shear connection with groups of headed studs
(Union of Croatian Civil Engineers and Technicians, 2017)
The behaviour and characteristics of the elements of prefabricated composite steel and concrete structures are determined by behaviour of the longitudinal shear connection. Headed studs in groups are most frequently used ...
Recent research of shear connection in prefabricated steel-concrete composite beams / Savremena istraživanja smičućeg spoja prefabrikovanih spregnutih greda od čelika i betona
(Institut za istraživanja i projektovanja u privredi, Beograd, 2014)
Prefabrication of steel-concrete composite decks can improve their competitiveness and sustainability. This paper presents recent studies of longitudinal shear connection at the University of Belgrade, Faculty of Civil ...
Environmental assessment of green concretes for structural use
(Journal of Cleaner Production, 2017)
This paper presents a comparative environmental assessment of several different green concrete mixes
for structural use. Four green concrete mixes were compared with a conventional concrete mix: recycled
aggregate concrete ...
The role of service life in Life Cycle Assessment of concrete structures
(Elsevier Ltd, 2020)
In comparative Life Cycle Assessment (LCA) of concrete structures it is of crucial importance to provide the functional equivalence of compared alternatives. Most commonly, the comparison is performed between the structures ...
Service life design of concrete structures, Part 2: Verifications for different deterioration mechanisms / Projektovanje betonskih konstrukcija prema upotrebnom veku, deo 2 - proračunski dokazi za različite deteriorizacione mehanizme
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2008)
Service life design is based on quantifying of the deterioration mechanisms of concrete structures. This paper presents the physical or chemical models for two most important deterioration mechanisms: carbonation induced ...
Structural concrete with partial or total cement replacemnet with fly ash / Konstrukcijski betoni sa delimičnom ili potpunom zamenom cementa elektrofilterskim pepelom
(Savez građevinskih inženjera Srbije, Beograd, 2015)
Building industry is facing with great challenges in directing its activities towards sustainable development. Environmental protection, the use of waste and recycled materials and reduction of the use of non-renewable ...