Претраживање
Приказ резултата 231-240 од 250
Numerical modelling of end-notched glulam beams reinforced with screws
(MASE - Macedonian Association of Structural Engineers, 2019)
Load carrying capacity of solid timber and glued laminated timber (glulam) beams is significantly decreased if there are notches made at the supports. Sudden change in cross-section height (notch) results in deviation of ...
Cement Composites Modeling Using Amorphous Kaolin
(45. International October Conference on Mining and Metallurgy, 16-19 October 2013, Bor Lake, 2013)
Cement based composites (concrete and mortar) are widely used in building industry, owing their popularity to huge production rate of cement. Nevertheless, cement production was found to have several negative environmental ...
Long-term deflections of green concrete beams: Analytical and numerical calculations
(Društvo građevinskih konstruktera Srbije, Beograd, 2018)
Reliably calculating the deflections is one of the more difficult aspects of the design of reinforced concrete members. All calculation models require a large number of experimental results for their calibration. Such ...
Long-term behavior of composite concrete girders made continuous
(MASE, 2011)
Time-dependent effects are significant for the design of range of concrete structures. Reliable data for creep and shrinkage properties of concrete and analytical procedures are needed to account for these effects. A number ...
Numerical modelling of notched glulam beams
(MASE - Macedonian Association of Structural Engineers, Skopje, 2017)
Numerical modelling of glulam beams externally reinforced with CFRP plates
(Vienna University of Technology, 2016)
Timber beams can effectively be reinforced using externally bonded fibre reinforced polymer (FRP) composites. This paper describes a nonlinear 3-dimensional finite element model which was developed in order to accurately ...
Sanacija zidanog dimnjaka u Termoelektrani Kostolac A
(Fakultet tehničkih nauka, Departman za građevinarstvo i geodeziju, Novi Sad, 2015)
Properties Of Self-Compacting Concrete Reinforced With Steel and Synthetic Fibers
(Society for materials and structures testing of Serbia, DIMK, 2011)
Experimental research results of basic physical and mechanical properties of fiber
reinforced self compacting concrete (SFR SCC) are presented in this paper. Besides reference
SCC, two fiber reinforced mixtures were made ...
Mathematical interpretation of nonlinear relationship of stainless steel stress and strain
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2015)
Basic distinctive characteristics of stainless steels are reflected in the nonlinear relationship of stress and strain, prominent ductility, strain hardening due to cold forming, asymmetry and anisotropy of material. These ...
Calibration of the high strenght bolts for measuring of the pretension force
(International Conference on ADVANCES IN STEEL STRUCTURES, Lisbon, Portugal, July 22-24, 2015., 2015)
When analysing slip resistance connections, which are commonly used in-situ assemblied joints of structures dominantly loaded by cyclic loading, for example in bridges, telecommunication towers, towers for wind turbines, ...