Претраживање
Приказ резултата 221-230 од 245
Design of cross-laminated timber (CLT) floors for human-induced vibrations
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2023)
Cross-laminated timber (CLT) is an innovative engineering wood product made by gluing layers of solid timber boards placed in an orthogonally alternating orientation to the neighbouring layers. CLT panels provide an efficient ...
Service Life Design of Concrete Structures Made of High-Volume Limestone Powder Concrete—Case of the Carbonation-Induced Corrosion
(MDPI, Basel, Switzerland, 2023)
One of the paths to CO2 emissions reduction in the concrete industry is to use low-clinker cements, providing at the same time the performance of concrete that is adequate for application in concrete structures. This paper ...
Selection of wastewater treatment technology: AHP method in multi-criteria decision making
(MDPI, Basel, Switzerland, 2023)
Wastewater treatment is a process that reduces pollution to those quantities and concentrations at which purified wastewater is no longer a threat to human and animal health and safety and does not cause unwanted changes ...
Utilization of solidified industrial hazardous waste in construction: A case study
(ACHE Publishing, 2023)
Utilization possibilities of solidified fractions of industrial hazardous waste obtained by mixing
with inert materials in construction were investigated. Waste mineral oils, water-hydrocarbon
emulsions mixture, and waste ...
Uticaj parametara strukture na trajnost hidrotehničkih betona
(Sfera d.o.o., 2021)
Experimental investigation of recycled aggregate concrete / Eksperimentalno ispitivanje betona od recikliranog agregata
(Savez građevinskih inženjera Srbije, Beograd, 2011)
As a result of increasing global environmental awareness and sense of responsibility for future generations utilization of demolition waste as a source of aggregate for structural concrete have been proposed. Financial ...
Contribution of strain-hardening cementitious composites (SHCC) to shear resistance in hybrid reinforced concrete beams
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije (DIMK)Univerzitet u Beogradu, Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2023)
Strain Hardening Cementitious Composite (SHCC) is an innovative type of fibre-reinforced cement-based composite that has superior tensile properties. Because of this, it holds the potential to enhance the shear capacity ...
Compressive strength of green concretes with low cement and high filler content
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
It is estimated that by the end of the current decade, about 26% of clinker will be replaced by suitable alternative materials, among which limestone filler probably has the greatest potential due to its wide availability ...
Push-out experiments of headed shear studs in group arrangements
(Advanced Steel Construction, 2013)
Precast concrete slabs connected to the steel beams by headed shear studs arranged in groups may be used in high-rise office buildings to speed up construction process and improve quality by increasing the grade of ...
Sanacija oštećenja lepljenih lameliranih drvenih greda sa redukovanom visinom preseka kod oslonaca pomoću GFRP šipki
(Savez građevinskih inženjera Srbije, 2020)
U radu je predstavljeno eksperimentalno ispitivanje mogućnosti sanacije oštećenih lepljenih lamliranih drvenih greda sa redukovanom visinom preseka kod oslonaca pomoću šipki na bazi polimera ojačanih staklenim vlaknima ...