Претраживање
Приказ резултата 1-10 од 168
Thermomechanical behavior of bio-fiber composite thermal insulation panels
(Elsevier, 2020)
The thermomechanical properties of the bio-fiber composite, as material for the production of thermal insulation panels, were evaluated. The observed mixtures were composed of Miscanthus X giganteus bio-fibers, mineral ...
Determinationof the salt distribution in the lime-based mortar samples using XRF and SEM-EDX characterization
(Springer, 2023)
Although, the salt crystallization is one of the most common causes of the deterioration of lime-based mortars, testing of their resistance to the soluble salt action has not yet been standardized. The problems following ...
Building with wood in 21st century: Contemporary building wood products
(UNIVERSITY OF MONTENEGRO FACULTY OF CIVIL ENGINEERING, 2020)
Sustainable design, alongside environmental awareness, is increasingly becoming a requirement
for building construction. Since the construction industry represents one of the biggest sectorial
emitters of greenhouse ...
Methodology development for daylight simulation for highly glazed office space models in Belgrade climate conditions
(Nano, Bio and Green - Technologies for A Sustainable Future, Vol Ii (Sgem 2015), 2015)
In everyday architectural practice parameters affecting daylight are not often taken into account. Usually the relationship between opaque and transparent parts of the facade is defined by functional or aesthetic parameters ...
Design for time dependant effects in precast concrete bridge girders made continuous with cast-in-place deck and diaphragm
(Czech Concrete Society, 2011)
There are many benefits when precast bridge girders are made continuous for live load, such as: lower costs, improved durability, improved structural integrity, improved ride quality, etc. Material nonlinearity of concrete ...
Recommendations for the design of grouped headed studs
(Wiley-Blackwell, 2017)
Grouped headed studs may be successfully utilized to achieve the longitudinal shear connection between prefabricated slabs and steel beams. The behaviour of the studs and the ultimate resistance of the group were analysed ...
Experimental investigation of compressed stainless steel angle columns
(International Colloquium on Stability and Ductility of Steel Structures, 2019)
This paper presents the experimental programme of an extensive research project that deals with analysing the behaviour of compressed stainless steel columns with equal angle sections. The research focuses on different ...
Valorization of Fly Ash from a Thermal Power Plant for Producing High - Performance Self-Compacting Concrete
(Science of Sintering, 2020)
This study analyzes the feasibility of valorizing industrial by - product, fly ash from a thermal power plant as a partial replacement of mineral filler - limestone for the production of self-compacting concrete (SCC). ...
Investigation of Self-compacting Mortars with Fly Ash and Crushed Brick
(Engineering & Architecture Research Division of ATINER, 2016)
The use of industrial by-products and waste materials in cement composites production has been one of the most intriguing topics in construction materials science for several decades. This paper reports an investigation ...
New Eurocode 4 design rules for composite beams with precast concrete slabs
(Ernest & Sohn a Willey Brands, 2023)
As members of Project Team SC4.T5, the authors of this paper present the main outcomes from the work that isintended for implementation within the second generation of Eurocode 4. General design and application ...