Претраживање
Приказ резултата 1-10 од 37
Potential of Natural and Recycled Concrete Aggregate Mixtures for Use in Pavement Structures
(MDPI, 2020)
This study investigates the feasibility of using recycled concrete aggregate (RCA) as a partial substitution of natural aggregate in pavement engineering. Despite RCA’s good properties, such as polishing value and freeze-thaw ...
Dynamic behavior of a cable-stayed footbridge over river Vrbas in Banja Luka
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
This paper presents a dynamic behavior analysis of an old cable-stayed footbridge over river Vrbas in Banja Luka. Identification of modal parameters, of this prone to vibrations footbridge structure, was performed using ...
Modal properties of the old suspension footbridge based on ambient vibration measurements
(THE 7th INTERNATIONAL CONFERENCE "CIVIL ENGINEERING - SCIENCE AND PRACTICE" GNP 2020 – Kolašin, Montenegro, 2020)
The paper presents study of dynamic properties estimation based on ambient vibration measurements of the old suspension footbridge over the river Vrbas in Banja Luka (in Šeher sub-area), Serbian Republic in Bosnia. Prone ...
Novo tehničko rešenje baze podataka o mostovima u Republici Srbiji
(Put i saobracaj, 2020)
Radi efikasnog održavanja mostova, u svetu su razvijeni sistemi održavanja mostova(Bridge management system –BMS). U cilju unapređenja i daljeg razvoja, JP Putevi Srbije su inicirali projekat pod ...
Influence of cracks on concrete carbonation resistance
(University of Montenegro Faculty of Civil Engineering, 2020)
In reinforced concrete (RC) structures carbonation induced corrosion is one of the biggest durability issue. There are many factors that affect carbonation process (CO2 concentration, relative humidity, temperature, curing ...
High temperature materials: properties, demands and applications
(Association of Chemical Engineers of Serbia, 2020)
High-temperature materials are used in a wide range of industries and applications such as gas turbine engines for aircrafts, power and nuclear power plants, different types of furnaces, including blast furnaces, some fuel ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...
A numerical verification of IPE-80 steel cantilever beam with bolted and welded splice connection joint
(THE 7th INTERNATIONAL CONFERENCE "CIVIL ENGINEERING - SCIENCE AND PRACTICE" GNP 2020 – Kolašin, Montenegro, 2020)
The aim of this paper is to discuss numerical analysis and verification of experimentally tested bolted and weld splice connections in the commercial Abaqus software. The first step in verifying a numerical model with an ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Behaviour of stainless steel plain channel section columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability of cold-formed stainless steel plain channel columns under axial compression is investigated. Reliable finite element models for channel section columns are first ...