Search
Now showing items 1-10 of 17
Effect of aggregate type and fly ash content on properties of self-compacting concrete
(Akademija nauka i umetnosti Republike Srpske, 2019)
The paper presents the results of experimental study of Self-Compacting Concrete in fresh and hardened state. Five mixtures were made, in which the content of the following components was varied: aggregates, fly ash in ...
Physical and Mechanical Properties of Concrete Cured at Low Temperatures
(Business Technical College, Uzice, 2017)
The paper reports the results of experimental tests of physical and mechanical properties of concrete which hardened in cold weather conditions without curing, without protection against precipitation and also without ...
Quantitative and Qualitative Analysis of Concrete Elements in Wind Park
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources Kneza Miloša str. 7a/II, 11000 Beograd, 2019)
Establishing a wind park presents a complex enterprise, which involves numerous activities, often impossible to synchronize and drive into the appropriate time-frame. Therefore, in some cases, based on reasonable suspicion, ...
Carbonation resistance of high volume fly ash concrete estimated with accelerated and natural tests
(4th RILEM International Conference on Service Life Design for Infrastructures, 2018)
The reuse of industrial residue streams such as fly ash (FA) can be beneficial both from economic and ecological points of view but the durability properties remain the key properties to ensure sustainable application of ...
Application of Genetic Algorithm in design of arch bridge
(Građevinski fakultet Subotica, 2021)
Topic of this article is application of Genetic Algorithm (GA) as a method of
global optimization for determining characteristic dimensions of arch concrete bridge.
Implementation of genetic algorithm for designing ...
Possibilities of Using Sulfur for Concrete Production and its Application
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources Kneza Miloša str. 7a/II, 11000 Beograd, 2015)
Two types of concrete will be shown in this paper. First type of concrete is sulfur concrete, where part of Portland cement was replaced with sulfur. Second type of concrete is selfcompacting concrete, where sulfur replaced ...
Basic principles of 3D concrete printing in the light of sustainable development
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2021)
Although conservative, the construction industry must be transformed in line with new technologies. Adopting the concept of 3D printing can provide a handful of benefits in terms of creativity, flexibility, less waste ...
Use of Wave Energy to Obtain Kinetic Energy
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2022)
Wave energy is largely an unused resource for generating electricity, where it is converted into electricity through kinetic energy. There are a number of advantages to adopting this solution. Two of the most important ...
Design aspects of Eurocode 2 methods for deflection control
(Czech Concrete Society, 2011)
Paper deals with problems arising from application of the EN 1992-1-1:2004 deflection control clauses. Remarks are addressed both to the instructions for a rigorous method and to the simplified procedure for an indirect ...
Green Concrete and Mortar Made with Recycled Aggregate – a Step towards Sustainability in Civil Engineering
(IRASA – International Research Academy of Science and Art Belgrade, 2022)
The testing of physical and mechanical properties has always been the starting point for production of adequate cement composites, such as concrete and mortar. The need to preserve the environment by recycling materials, ...