Претраживање
Приказ резултата 1-10 од 214
Valorization of Fly Ash from a Thermal Power Plant for Producing High - Performance Self-Compacting Concrete
(Science of Sintering, 2020)
This study analyzes the feasibility of valorizing industrial by - product, fly ash from a thermal power plant as a partial replacement of mineral filler - limestone for the production of self-compacting concrete (SCC). ...
Performance of reinforced concrete buildings during the November 26, 2019 Albania earthquake (Mw 6.4) and December 29, 2020 Petrinja earthquake (Mw 6.4)
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Past earthquakes have affected millions of people whose lives changed within a minute, and caused damage or collapse of thousands of buildings and infrastructure systems. In many cases, earthquakes have long-term consequences. ...
Determinationof the salt distribution in the lime-based mortar samples using XRF and SEM-EDX characterization
(Springer, 2023)
Although, the salt crystallization is one of the most common causes of the deterioration of lime-based mortars, testing of their resistance to the soluble salt action has not yet been standardized. The problems following ...
Potential of Natural and Recycled Concrete Aggregate Mixtures for Use in Pavement Structures
(MDPI, 2020)
This study investigates the feasibility of using recycled concrete aggregate (RCA) as a partial substitution of natural aggregate in pavement engineering. Despite RCA’s good properties, such as polishing value and freeze-thaw ...
Experimental investigation of influence parameters on cartridge fired pin resistance
(Ernst & Sohn GmbH, 2023)
Cartridge fired pins, also known as powder actuated fasteners, have a wide application in different construction industry fields, mostly for joints of cold-formed structural elements and profiled steel sheeting, or for ...
Design of concrete structures according to Eurocode 2 and BAB 87: comparison of basic calculations
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Blvd. Partizanski odredi No. 24 P.Box. 560, 1000 Skopje, Republic of North Macedonia, 2022)
Structural Eurocodes have superseded national design codes in a number of countries. The education
of engineers is necessary for quick and successful adaptation to new standards. Qualified institutions
should organize ...
Concrete modeling in finite element push-out test simulations
(MASE - Macedonian Association of Structural Engineers, Skopje, 2023)
Push-out tests are commonly used to investigate the shear performance of mechanical connectors
applicable in steel-concrete composite beams. These tests can be complemented by numerical finite element simulations to reduce ...
Experimental analysis of structural damping for bolted and welded splice connection join for IPE-80 steel profile
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Progress and demands of all types of constructions imposed the need for the development of modern structures that are lightweight, but at the same time have high damping capacity and stiffness. The consequences of these ...
Experimental determination and study of structural damping and dry friction
(Contemporary achievements in civil engineering 22-23. April 2021. Subotica, SERBIA, 8th INTERNATIONAL CONFERENCE, 2021)
The challenge that will be posed to researchers for an even longer period is
the development of a predictable model for describing mechanical connections, their
variable stiffness and dissipative contact interaction ...
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...