Search
Now showing items 1-10 of 29
Methodology development for daylight simulation for highly glazed office space models in Belgrade climate conditions
(Nano, Bio and Green - Technologies for A Sustainable Future, Vol Ii (Sgem 2015), 2015)
In everyday architectural practice parameters affecting daylight are not often taken into account. Usually the relationship between opaque and transparent parts of the facade is defined by functional or aesthetic parameters ...
Stainless steel cross-section resistance according to continuous strength method
(iNDiS 2015 Planiranje, projektovanje, građenje i obnova graditeljstva 13. međunarodna naučna konferencija, 2015)
Continuous strength method is a contemporary approach to calculation of resistance of stainless steel cross-sections which has been recently developed at the Imperial College of London. The basis of the method is the ...
Calibration of the bolt pretension by strain gauges vs. FEA
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Skopje, Republic of Macedonia, 2015)
When applying high strength bolts in friction connections, in such case a load–bearing capacity depends on a pretension force in the bolts as well as on a friction coefficient found on friction surfaces. It is important ...
Design recommendations of floor vibrations induced by human activities
(Macedonian Association of Structural Engineers, Skopje, 2015)
Structural engineers are now facing with new demands towards long spans, lightweight floors in steelconcrete composite construction and big open interiors. Thеsе new design trends аrе leading to the extensive problems ...
Simplified design recommendations for beam-to-column joints according to Eurocode
(Eighth International Conference on ADVANCES IN STEEL STRUCTURES, 2015)
The design rules in EN 1993-1-8 (the Eurocode) for beam-to-column joints in steel frames with endplate are based on the component method. Generally, three different zones of the joint are considered: tension, shear and ...
Introducing of Eurocodes in structural technical regulation of Serbia: an overview of current state / Uvođenje evrokodova u građevinsku regulativu Srbije – prikaz trenutnog stanja
(Zavod za izgradnju ; Arhitektonsko-građevinski fakultet, Banja Luka, 2015)
Recent activities undertaken on adoption and implementation of European norm for structures in Serbia are presented in this article. Besides the review of European standards that have until now been adopted as national ...
Properties of cement mortars with addition of amorphous kaolin / Svojstva cementnih maltera sa dodatkom amorfnog kaolina
(Građevinski fakultet, Subotica, 2015)
The paper deals with experimental investigations of physical and mechanical properties of mortars with the addition of amorphous kaolin, which has been obtained from kaolin clay of Arandjelovac basin. In experimental ...
Influence of vibrations during concrete setting on its physical and mechanical properties
(Macedonian Association of Structural Engineers, Skopje, 2015)
Fly ash application in mortar and concrete
(IRMA Inštitut za raziskavo materialov in aplikacije, Ljubljana, 2015)