Претраживање
Приказ резултата 11-20 од 223
Building with wood in 21st century: Contemporary building wood products
(UNIVERSITY OF MONTENEGRO FACULTY OF CIVIL ENGINEERING, 2020)
Sustainable design, alongside environmental awareness, is increasingly becoming a requirement
for building construction. Since the construction industry represents one of the biggest sectorial
emitters of greenhouse ...
Evaluation of Concrete Cover Depth for Green Concretes Exposed to Carbonation
(John Wiley & Sons Ltd, 2020)
Carbonation resistance of fly ash concrete (FAC) and recycled aggregate concrete (RAC) has been extensively tested in the past decade, but there are still no recommendations for their application in codes of practice. ...
Review of basic concepts of contact mechanics of frictionless contact with emphasis on penalty method
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Problems involving contact are of great importance in industry related to mechanical and civil
engineering, but also in biomechanics and other applications. The contact interaction between
surfaces and different bodies ...
Determinationof the salt distribution in the lime-based mortar samples using XRF and SEM-EDX characterization
(Springer, 2023)
Although, the salt crystallization is one of the most common causes of the deterioration of lime-based mortars, testing of their resistance to the soluble salt action has not yet been standardized. The problems following ...
Influence of cracks on the deterioration mechanisms and durability of reinforced concrete structures
(Association of Structural Engineers of Serbia, 2022)
The most important factor that affects concrete deterioration is the appearance of cracks on reinforced concrete (RC) structures, so the influence of loading cracks should not be neglected when the service life is analyzed. ...
Use of Wave Energy to Obtain Kinetic Energy
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2022)
Wave energy is largely an unused resource for generating electricity, where it is converted into electricity through kinetic energy. There are a number of advantages to adopting this solution. Two of the most important ...
Structural application of 3D concrete printing
(Association of Structural Engineers of Serbia, 2022)
3D concrete printing technology enabled a new progress in industrialization, optimization and automatization of processes in contemporary construction works. This paper shows the commonly used methods of concrete 3D printing. ...
Imperfection sensitivity study of hot-rolled and laser-welded stainless steel angle columns
(Ernst&Sohn, 2021)
Stainless steel sections are used for structures in aggressive environments where the greater material cost can often be justified in return for longer maintenance-free periods, for example in the water treatment, ...
Sustainable solutions for structural concrete – research conducted by Belgrade’s concrete structures research group over the last decade
(Departman za građevinarstvo i geodeziju, Fakultet tehničkih nauka, Novi Sad, 2021)
During the last decade, a comprehensive experimental and numerical research on various sustainable concrete options for application in concrete structures was performed at the Faculty of Civil Engineering, University of ...
Behaviour of shear connections realised by connectors fastened with cartridge fired pins
(Univerzitet u Beogradu, Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
Composite action between steel beams and prefabricated or solid concrete slabs can be achieved with various types of shear connectors which differ considering their main properties, installation time and required equipment ...