Pretraživanje
Prikaz rezultata 21-30 od 95
Numerical and experimental analysis of structural damping for bolted splice connection joint
(Contemporary achievements in civil engineering 22-23. April 2021. Subotica, SERBIA,8th INTERNATIONAL CONFERENCE, 2021)
This paper presents the finite element modeling of bolted joints for structural
dynamic analysis to achieve a reasonable accuracy in simulation results. Non-linear
effects in splice connected joints involve normal ...
Prikaz vanrednog prevoza na putnoj mreži Republike Srbije
(Srpsko društvo za puteve, 2020)
U radu je dat prikaz vanrednog prevoza na putnoj mreži Republike Srbije. Razmatrane su dozvole za vanredni prevoz koje izdaje javno preduzeće Putevi Srbije za dva reprezentativna meseca april i septembar u 2019. godini. ...
Effects of natural zeolite addition on the properties of lime putty-based rendering mortars
(Elsevier, 2021)
The application of locally available component materials (lime putty and zeolitic rock as pozzolanic admixture) in two types of rendering mortars (designed for inner and outer render layer), was assessed through TG/DTA, ...
Comparisson between damage development on composite and standardized mortar specimens exposed to soluble salts
(Proceedings of SWBSS 2021 Fifth International Conference on Salt Weathering of Buildings and Stone Sculptures, 2021)
Salt crystallization of lime-based rendering mortars is one of the most common reasons for their deterioration. Still, testing of the resistance to soluble salt action has not yet been standardized for this type of material. ...
Potential of Natural and Recycled Concrete Aggregate Mixtures for Use in Pavement Structures
(MDPI, 2020)
This study investigates the feasibility of using recycled concrete aggregate (RCA) as a partial substitution of natural aggregate in pavement engineering. Despite RCA’s good properties, such as polishing value and freeze-thaw ...
Experimental study of laser-welded stainless steel angle columns
(Thin-Walled Structures, 2021)
Substantial research has been conducted in the last years into the structural responses of cold-formed and hot-rolled stainless steel equal-leg angle columns, whereas there is no experimental data on laser-welded stainless ...
The Laboratory Investigations of High-Density Polyethylene Drains for Application in Tailings
(University of Banja Luka, Faculty of Architecture, Civil Engineering and Geodesy, 2020)
For the purposes of draining material deposited in the tailings pond under construction, there was a need to examine the properties of the high-density polyethylene drain tubes and the consisting materials in order to ...
Design criteria for pin-ended hot-rolled and laser-welded stainless steel equal-leg angle columns
(Thin-Walled Structures, 2021)
This paper explores an attempt to investigate the structural behaviour and design of equal-leg stainless steel angle columns fabricated by the laser-welding of individual hot-rolled plates and by hot-rolling process. The ...
Stability design criteria for closely spaced built-up stainless steel columns
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
This paper aims to develop design recommendations for closely spaced built-up stainless steel columns, based on findings gained in performed research at the University of Belgrade. The research focuses on pin-ended built-up ...
Design of frp strengthened masonry structures
(Univerzitet u Beogradu Građevinski fakultet, 2021)
Masonry structures are prone to different types of damages caused by overloading, design or
construction errors, durability problems, accidental loading. Depending on the extent of
damages, failure of masonry structures ...