Претраживање
Приказ резултата 21-30 од 79
Potential of Natural and Recycled Concrete Aggregate Mixtures for Use in Pavement Structures
(MDPI, 2020)
This study investigates the feasibility of using recycled concrete aggregate (RCA) as a partial substitution of natural aggregate in pavement engineering. Despite RCA’s good properties, such as polishing value and freeze-thaw ...
Experimental study of laser-welded stainless steel angle columns
(Thin-Walled Structures, 2021)
Substantial research has been conducted in the last years into the structural responses of cold-formed and hot-rolled stainless steel equal-leg angle columns, whereas there is no experimental data on laser-welded stainless ...
Effects of waste sulfur content on properties of self-compacting concrete
(Consejo Superior de Investigaciones Cientificas ^Instituto de Ciencias de la Construccion Eduardo Torroja, 2020)
Self-compacting concrete (SCC) contains fine mineral fillers such as limestone powder. The idea
of this study was to partially replace limestone with waste sulfur since it is hydrophobic, insoluble in water and therefore ...
The Behaviour of Shear Anchors with Different Grout Properties
(Ernst&Sohn, 2021)
During the assembling of a steel structure with anchors, grout should be used in connections be-
tween steel elements and a reinforced concrete support element. In horizontal and vertical joints,
grout is used as a good ...
Effect of accelerated carbonation on the efficiency of immobilization of Cs in the alkaliactivated blast furnace slag
(Slovenian National Building and Civil Engineering Institute (ZAG), 2021)
In this paper the effect of accelerated carbonation process on the effectiveness of immobilization of cesium (simulated radioactive and toxic waste) in the alkali-activated blast furnace slag (AABFS) matrix was studied. ...
Basic principles of 3D concrete printing in the light of sustainable development
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2021)
Although conservative, the construction industry must be transformed in line with new technologies. Adopting the concept of 3D printing can provide a handful of benefits in terms of creativity, flexibility, less waste ...
Valorization of Fly Ash from a Thermal Power Plant for Producing High - Performance Self-Compacting Concrete
(Science of Sintering, 2020)
This study analyzes the feasibility of valorizing industrial by - product, fly ash from a thermal power plant as a partial replacement of mineral filler - limestone for the production of self-compacting concrete (SCC). ...
Dynamic behavior of a cable-stayed footbridge over river Vrbas in Banja Luka
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
This paper presents a dynamic behavior analysis of an old cable-stayed footbridge over river Vrbas in Banja Luka. Identification of modal parameters, of this prone to vibrations footbridge structure, was performed using ...
The Impact of Recycled Concrete Aggregate on the Stiffness, Fatigue, and Low-Temperature Performance of Asphalt Mixtures for Road Construction
(MDPI, 2020)
The need for road (re)construction materials is constantly growing. At the same time, there
is a limited quantity of new, high-quality materials available and a buildup of secondary/recycled
construction materials. One ...