Претраживање
Приказ резултата 31-40 од 161
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...
Experimental investigation of preload losses in high strength bolts under cyclic loading
(GRAĐEVINAR, 2021)
Slip-resistant shear connections with preloaded bolts have traditionally been used in steel
structures exposed to cyclic. Hence, shear load is transferred through friction surfaces
rather than through contact between the ...
A numerical verification of IPE-80 steel cantilever beam with bolted and welded splice connection joint
(THE 7th INTERNATIONAL CONFERENCE "CIVIL ENGINEERING - SCIENCE AND PRACTICE" GNP 2020 – Kolašin, Montenegro, 2020)
The aim of this paper is to discuss numerical analysis and verification of experimentally tested bolted and weld splice connections in the commercial Abaqus software. The first step in verifying a numerical model with an ...
Thermomechanical behavior of bio-fiber composite thermal insulation panels
(Elsevier, 2020)
The thermomechanical properties of the bio-fiber composite, as material for the production of thermal insulation panels, were evaluated. The observed mixtures were composed of Miscanthus X giganteus bio-fibers, mineral ...
Review of basic concepts of contact mechanics of frictionless contact with emphasis on penalty method
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Problems involving contact are of great importance in industry related to mechanical and civil
engineering, but also in biomechanics and other applications. The contact interaction between
surfaces and different bodies ...
Physical-mechanical properties and durability of Ultra-high Performance Concrete (UHPC)
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade, Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
This paper presents the results of the authors' laboratory testing of physical,
mechanical and durability properties of Ultra-high Performance Concrete (UHPC).
The short history of development and application of UHPC ...
The Laboratory Investigations of High-Density Polyethylene Drains for Application in Tailings
(University of Banja Luka, Faculty of Architecture, Civil Engineering and Geodesy, 2020)
For the purposes of draining material deposited in the tailings pond under construction, there was a need to examine the properties of the high-density polyethylene drain tubes and the consisting materials in order to ...
Experimental response of hot-rolled stainless steel angle columns
(Thin-Walled Structures, 2021)
This paper reports on experiments addressing the buckling and collapse behaviour of pin-ended hot-rolled stainless steel equal-leg angle columns under pure axial compression, aiming to provide reliable experimental data ...
The Behaviour of Shear Anchors with Different Grout Properties
(Ernst&Sohn, 2021)
During the assembling of a steel structure with anchors, grout should be used in connections be-
tween steel elements and a reinforced concrete support element. In horizontal and vertical joints,
grout is used as a good ...
Experimental study of laser-welded stainless steel angle columns
(Thin-Walled Structures, 2021)
Substantial research has been conducted in the last years into the structural responses of cold-formed and hot-rolled stainless steel equal-leg angle columns, whereas there is no experimental data on laser-welded stainless ...