Pretraživanje
Prikaz rezultata 211-220 od 234
Experimental testing of axial load capacity and stability of circular CFT columns
(Serbian Society of Mechanics, 2019)
The paper presents the experimental testing of the axial capacity and stability of short,
moderately slender and slender circular CFT columns. For the purpose of sample testing a special
set of hydraulic presses was ...
Nonlinear stability analysis of the frame structures
(South Eastern European Graduate School For Master and PhD Formation in Engineering, 2014)
In this doctoral thesis, the nonlinear stability analysis of frame structures is presented. Numerical analysis was performed by the finite element method. Stiffness matrices were derived using the trigonometric shape ...
Computation of flow separations from bridge girders and effects on flutter derivatives
(Meteorological Institute, CEN, University of Hamburg, Hamburg, 2014)
The widely used formulation of aeroelastic forces presented in the work of Scanlan and Tomko (1971) relies on the frequency dependent coefficients - flutter derivatives and wind tunnel experiments as their identification ...
Вибрације и избочавањe плоча и љуски применом методе динамичке крутости
(Универзитет у Београду, Грађевински факултет, 2016)
Метод динамичке крутости (МДК) представља алтернативу методуконачних елемената (МКЕ) у анализи вибрација и избочавањаконструкција. Основни елемент у МДК је континуални елемент, односноњегова матрица крутости, која је ...
Concave Pyramids of Second Sort -The Occurrence, Types, Variations
(Faculty of Civil Engineering and Architecture ; Serbian Society for Geometry and Graphics SUGIG, Niš ; Beograd, 2014)
Correspondingly to the method of generating the Concave Cupolae of second sort, the Concave Pyramids of second sort have the similar logic of origination, and their counterpart in regular faced convex pyramids (tetrahedron, ...
Pressure field analyses of a low-rise building model surrounded by neighbouring buildings in urban areas
(Serbian Society of Mechanics, 2019)
In this paper, pressure field over the roof of low-rise building model has been investigating using numerical simulations. The model is surrounded by four neighboring buildings of the same geometry as the principle one. ...
The Complement of the Hugelschaffer’s Construction of the Egg Curve
(Belgrade: Faculty of Architecture in Belgrade; Serbian Society for Geometry and Graphics (SUGIG), 2010)
Hügelschäffer’s construction, based on the distortion of the
ellipse construction, provides an egg-shaped curve. This curve is a
mixed cubic curve, the cubic hyperbolic parabola of type A. Curve is a
three-branched and ...
Enhancing energy efficiency by application of green roof in residential building
(Faculty Of Civil Engineering Subotica, 2019)
Improving the energy efficiency in buildings in the Republic of Serbia has been recognized as an area with the greatest potential for reducing overall energy consumption. It also has an indirect impact on improving the ...
Parametric Study of Circular CFT Column Capacity According to Eurocode 4 / Parametarska analiza nosivosti kružnih CFT stubova prema Evrokodu 4
(Građevinski fakultet, Subotica, 2014)
In the paper, a simplified method for design of circular composite CFT columns according to the European standard for deisgn of composite steel and concrete structures – Eurocode 4 is presented. Veri¬fication of the column ...
The Structural Transformation of Concave Cupolae of Fourth Sort Using Different Variants of Constructive Procedure, 4th International Scientific Conference on Geometry and Graphics
(Faculty of Civil Engineering and Architecture ; Serbian Society for Geometry and Graphics SUGIG, Niš ; Beograd, 2014)
Concave Cupolae of fourth sort (CC IV) are polyhedra which lateral surface is created by folding a quadruple strip of equilateral triangles, while the bases are regular polygons. The unit cell that forms the deltahedral ...