Претраживање
Приказ резултата 301-310 од 346
The Complement of the Hugelschaffer’s Construction of the Egg Curve
(Belgrade: Faculty of Architecture in Belgrade; Serbian Society for Geometry and Graphics (SUGIG), 2010)
Hügelschäffer’s construction, based on the distortion of the
ellipse construction, provides an egg-shaped curve. This curve is a
mixed cubic curve, the cubic hyperbolic parabola of type A. Curve is a
three-branched and ...
Damage reduction system for masonry infill walls under seismic loading
(ICAAC ‐ 6th International Conference on Autoclaved Aerated Concrete, 2018)
Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all
over the world. Generally masonry infills are considered as nonstructural elements and thus are
typically neglected in the ...
Nosivost spregnutih stubova od kružnih šupljih čeličnih profila ispunjenih betonom
(Универзитет у Београду, Грађевински факултет, 2018)
Predmet disertacije je određivanje aksijalne nosivosti i stabilnosti kružnih šupljih čeličnihprofila ispunjenih betonom, u daljem CFT stubovi (eng. Concrete Filled Tubes).Problem istraživanja je određivanje stabilnosti CFT ...
Geometrical Characteristics and Solid Modeling of the Grasshopper Escapement Mechanism
(Faculty of Civil Engineering and Architecture ; Serbian Society for Geometry and Graphics SUGIG, Niš ; Beograd, 2014)
This paper presents the geometrical properties of one special type of escapement mechanism – the grasshopper escapement, by which the first marine chronometers were equipped. The most important and distinguish mechanical ...
Enhancing energy efficiency by application of green roof in residential building
(Faculty Of Civil Engineering Subotica, 2019)
Improving the energy efficiency in buildings in the Republic of Serbia has been recognized as an area with the greatest potential for reducing overall energy consumption. It also has an indirect impact on improving the ...
Parametric Study of Circular CFT Column Capacity According to Eurocode 4 / Parametarska analiza nosivosti kružnih CFT stubova prema Evrokodu 4
(Građevinski fakultet, Subotica, 2014)
In the paper, a simplified method for design of circular composite CFT columns according to the European standard for deisgn of composite steel and concrete structures – Eurocode 4 is presented. Veri¬fication of the column ...
Pressure field analyses of a low-rise building model surrounded by neighbouring buildings in urban areas
(Serbian Society of Mechanics, 2019)
In this paper, pressure field over the roof of low-rise building model has been investigating using numerical simulations. The model is surrounded by four neighboring buildings of the same geometry as the principle one. ...
Experimental testing of axial load capacity and stability of circular CFT columns
(Serbian Society of Mechanics, 2019)
The paper presents the experimental testing of the axial capacity and stability of short,
moderately slender and slender circular CFT columns. For the purpose of sample testing a special
set of hydraulic presses was ...
Conic Section of a Type of Egg Curve Based Conoid
(Belgrade: Faculty of Architecture in Belgrade; Serbian Society for Geometry and Graphics (SUGIG), 2010)
A cubic egg curve obtained by Hügelschäffer’s construction,
can be spatially interpreted as a plane section of a type of a conoid
set through a specially chosen 4-th order intersecting curve of two
quadrics: right ...
Forming the Cupolae With Concave Polyhedral Surfaces by Corrugating a Fourfold Strip of Equilateral Triangles
(Belgrade: Faculty of Architecture in Belgrade; Serbian Society for Geometry and Graphics (SUGIG), 2010)
The cupolae with concave polyhedral surfaces consist of: two regular
polygons, n-gone and 2n-gone in parallel planes, interconnected by an
envelope constituted of series of equilateral triangles. The paper
describes ...