Претраживање
Приказ резултата 1-10 од 41
Experimental investigation of wind load on low-rise industrial building
(Faculty of Civil Engineering Subotica, 2019)
Aim of this paper is to investigate wind pressure distribution on low-rise industrial
building based on the results from atmospheric boundary layer wind tunnel experiments.
Building model is a hanger with a tilted roof ...
Experimental investigation of wind flow around low-rise tilted house
(Faculty of Civil Engineering Subotica, 2019)
An experimental investigation has been conducted in order to give insight into wind flow characteristics in urban areas, in particular, its effects on low-rise buildings. Analyses are based on the results from atmospheric ...
Experimental and Numerical analysis of RC Frames with decoupled masonry infills
(COMPDYN 2019 - 7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2019)
Masonry infill walls are commonly used in reinforced concrete (RC) frame structures, also in seismically active areas, although they often experience serious damage during earthquakes. One of the main reasons for their ...
Nonlinear analysis of composite plates using layerwise finite element
(Mathematical Institute of the Serbian Academy of Sciences and Arts National Institute of the Republic of Serbia, 2019)
Comparison of different methods for viscoelastic analysis of composite beams
(Serbian Society of Mechanics, 2019)
The paper presents and compares four methods for visco-elastic analysis of steel-concrete composite beams. The method denoted as "exact" is based on the use of linear integro-differential operators and besides inevitable ...
Bending analysis of cross-laminated-timber (CLT) panels using layered finite elements
(Univerzitet u Beogradu, Građevinski fakultetUniverzitet Crne Gore, Građevinski fakultet PodgoricaAkademija inženjerskih nauka Srbije, 2019)
Cross-laminated timber panels are composite wood products with an increasing application in civil engineering. The low environmental impact and high mechanical performance encourage the use of CLT in modern buildings instead ...
Primena metode dinamičke krutosti u analizi slobodnih vibracija otvorenih kružnih cilindričnih ljuski
(Univerzitet u Beogradu-Građevinski fakultet, Univerzitet Crne Gore-Građevinski fakultet, Akademija inženjerskih nauka Srbije, 2019)
In this paper, the dynamic stiffness method has been applied in the free vibration analysis of open circular cylindrical shells having special boundary conditions. Dynamic stiffness matrix, based on the exact solutions of ...
Pressure field analyses of a low-rise building model surrounded by neighbouring buildings in urban areas
(Serbian Society of Mechanics, 2019)
In this paper, pressure field over the roof of low-rise building model has been investigating using numerical simulations. The model is surrounded by four neighboring buildings of the same geometry as the principle one. ...
Traditional materials as a solution to construction in the new age of climate distrubances
(Faculty Of Civil Engineering Subotica, 2019)
The paper contains the authors’ experiences and findings that were yielded as a result of measurements of the thermodynamic properties of traditional renewable materials. As a testament to the quality of existing traditional ...
Free vibration analysis of curved spatial Bernoulli-Euler beam with circular cross section using isogeometric approach
(2019)
In this paper the linear free vibration analysis of an arbitrarily curved spatial Bernoulli – Euler beam with circular cross section using isogeometric approach has been presented. In order to carry out free vibration ...