Pretraživanje
Prikaz rezultata 1-10 od 41
Experimental investigation of wind flow around low-rise tilted house
(Faculty of Civil Engineering Subotica, 2019)
An experimental investigation has been conducted in order to give insight into wind flow characteristics in urban areas, in particular, its effects on low-rise buildings. Analyses are based on the results from atmospheric ...
Experimental and Numerical analysis of RC Frames with decoupled masonry infills
(COMPDYN 2019 - 7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2019)
Masonry infill walls are commonly used in reinforced concrete (RC) frame structures, also in seismically active areas, although they often experience serious damage during earthquakes. One of the main reasons for their ...
Experimental investigation of wind load on low-rise industrial building
(Faculty of Civil Engineering Subotica, 2019)
Aim of this paper is to investigate wind pressure distribution on low-rise industrial
building based on the results from atmospheric boundary layer wind tunnel experiments.
Building model is a hanger with a tilted roof ...
Nonlinear analysis of composite plates using layerwise finite element
(Mathematical Institute of the Serbian Academy of Sciences and Arts National Institute of the Republic of Serbia, 2019)
Bending analysis of cross-laminated-timber (CLT) panels using layered finite elements
(Univerzitet u Beogradu, Građevinski fakultetUniverzitet Crne Gore, Građevinski fakultet PodgoricaAkademija inženjerskih nauka Srbije, 2019)
Cross-laminated timber panels are composite wood products with an increasing application in civil engineering. The low environmental impact and high mechanical performance encourage the use of CLT in modern buildings instead ...
Comparison of different methods for viscoelastic analysis of composite beams
(Serbian Society of Mechanics, 2019)
The paper presents and compares four methods for visco-elastic analysis of steel-concrete composite beams. The method denoted as "exact" is based on the use of linear integro-differential operators and besides inevitable ...
Pressure field analyses of a low-rise building model surrounded by neighbouring buildings in urban areas
(Serbian Society of Mechanics, 2019)
In this paper, pressure field over the roof of low-rise building model has been investigating using numerical simulations. The model is surrounded by four neighboring buildings of the same geometry as the principle one. ...
Free vibration analysis of curved spatial Bernoulli-Euler beam with circular cross section using isogeometric approach
(2019)
In this paper the linear free vibration analysis of an arbitrarily curved spatial Bernoulli – Euler beam with circular cross section using isogeometric approach has been presented. In order to carry out free vibration ...
Stability analysis of multi-story steel frames subjected to different axial load
(Serbian Society of Mechanics, 2019)
This paper presents a stability analysis of multi-story steel frames in the elastic and elasto-plastic domain. The concept of the tangent modulus theory is applied. Numerical analysis is carried out using FEM where ...
Experimental testing of axial load capacity and stability of circular CFT columns
(Serbian Society of Mechanics, 2019)
The paper presents the experimental testing of the axial capacity and stability of short,
moderately slender and slender circular CFT columns. For the purpose of sample testing a special
set of hydraulic presses was ...