Pretraživanje
Prikaz rezultata 31-40 od 40
Pushover analysis of RC frames with masonry infill
(Četvrto međunarodno naučno-stručno savetovanje “Zemljotresno inženjerstvo i inženjerska seizmologija”, 2014)
In the present paper, the methodology, suggested in FEMA guidelines for the evaluation of the seismic capacity of existing structures, is applied for the case of reinforced concrete frames with masonry infill. Calculations ...
Comparative seismic analysis of RC buildings under influence of soil-structure interaction
(Savez građevinskih inženjera Srbije, Beograd, 2014)
In this paper the effects of soil-structure interaction (SSI) on reinforced concrete (RC) buildings are analyzed. The dynamic analysis was carried out for two buildings of different heights, founded on three different types ...
Nonlinear stability analysis of the frame structures
(South Eastern European Graduate School For Master and PhD Formation in Engineering, 2014)
In this doctoral thesis, the nonlinear stability analysis of frame structures is presented. Numerical analysis was performed by the finite element method. Stiffness matrices were derived using the trigonometric shape ...
Geometrical Characteristics and Solid Modeling of the Grasshopper Escapement Mechanism
(Faculty of Civil Engineering and Architecture ; Serbian Society for Geometry and Graphics SUGIG, Niš ; Beograd, 2014)
This paper presents the geometrical properties of one special type of escapement mechanism – the grasshopper escapement, by which the first marine chronometers were equipped. The most important and distinguish mechanical ...
Computation of flow separations from bridge girders and effects on flutter derivatives
(Meteorological Institute, CEN, University of Hamburg, Hamburg, 2014)
The widely used formulation of aeroelastic forces presented in the work of Scanlan and Tomko (1971) relies on the frequency dependent coefficients - flutter derivatives and wind tunnel experiments as their identification ...
Parametric Study of Circular CFT Column Capacity According to Eurocode 4 / Parametarska analiza nosivosti kružnih CFT stubova prema Evrokodu 4
(Građevinski fakultet, Subotica, 2014)
In the paper, a simplified method for design of circular composite CFT columns according to the European standard for deisgn of composite steel and concrete structures – Eurocode 4 is presented. Veri¬fication of the column ...
Concave Pyramids of Second Sort -The Occurrence, Types, Variations
(Faculty of Civil Engineering and Architecture ; Serbian Society for Geometry and Graphics SUGIG, Niš ; Beograd, 2014)
Correspondingly to the method of generating the Concave Cupolae of second sort, the Concave Pyramids of second sort have the similar logic of origination, and their counterpart in regular faced convex pyramids (tetrahedron, ...
Influence of soil-structure interaction on the seismic response of RC buildings
(Društvo građevinskih konstruktera Srbije, Beograd, 2014)
In this paper the effects of the soil-structure interaction (SSI) on dynamic response of reinforced-concrete (RC) buildings of different heights are analyzed. Two 3D numerical models of 5 and 10-storey reinforced-concrete ...
The Structural Transformation of Concave Cupolae of Fourth Sort Using Different Variants of Constructive Procedure, 4th International Scientific Conference on Geometry and Graphics
(Faculty of Civil Engineering and Architecture ; Serbian Society for Geometry and Graphics SUGIG, Niš ; Beograd, 2014)
Concave Cupolae of fourth sort (CC IV) are polyhedra which lateral surface is created by folding a quadruple strip of equilateral triangles, while the bases are regular polygons. The unit cell that forms the deltahedral ...
Pit protection for deep excavations-modern methods of construction and design
(Faculty of Civil Engineering Ljubljana, 2014)
In urban areas, increasingly there is a need for building of a higher number of underground floors. Construction of pit protection for deep excavations in urban conditions, next to existing objects in the complicated ...