Претраживање
Приказ резултата 21-30 од 38
Free vibration analysis of FGM plates by using layer wise displacement model
(Serbian Society for Computational Mechanics, 2023)
In this paper, the free vibration analysis of simply supported functionally graded material (FGM) plate is analyzed. The displacement model based on Generalized Laminate Plate Theory (GLPT) assumes layer wise (LW) linear ...
Stability analysis of FGM plates by using layer wise displacement model
(Serbian Society for Computational Mechanics, 2023)
In this paper, the stability analysis of simply supported functionally graded material (FGM) plate under mechanical in–plane compressive loads is analyzed. The displacement model based on Generalized Laminate Plate Theory ...
Augmented state estimation of urban settings using on-the-fly sequential Data Assimilation
(Elsevier, 2023)
A data-driven investigation of the flow around a high-rise building is per- formed by combining heterogeneous experimental samples and numerical models based on the Reynolds-Averaged Navier–Stokes (RANS) equations. The ...
Practical ANN prediction models for the axial capacity of square CFST columns
(Springer, 2023)
In this study, two machine-learning algorithms based on the artificial neural network
(ANN) model are proposed to estimate the ultimate compressive strength of square
concrete-filled steel tubular columns. The development ...
Preisach model for inner hysteresis loops of cyclicly loaded mild steel elements
(International Conference Synergy of Architecture and Civil Engineering, 2023)
In this paper, the new type of Preisach model, that describes the inner hysteresis looops of structural mild steel under cyclic loading, is developed. It is the multilinear mechanical model, that describes closed hysteresis ...
Low-Cycle Fatigue Damage Model for Ductile Materials
(The Fourth International Conference on Damage MechanicsLouisiana State University, 2023)
In this paper, a uniaxial material model with the ability to describe progressive damage growth, but also to provide a reliable estimation of fatigue life in the low-cycle regime of loading, is presented. The determination ...
Adriseismic Methodology for Expeditious Seismic Assessment of Unreinforced Masonry Buildings
(Buildings, 2023)
The paper describes a novel Adriseismic method for exp4editious assessment of seismic risk associated with unreinforced masonry buildings. The methodology was developed for the Adriseismic project of the Interreg ADRION ...
Influence of inter-panel connections on vibration response of CLT floors due to pedestrian-induced loading
(Engineering Structures, 2023)
Long-span cross-laminated timber (CLT) floors are typically an assembly of prefabricated CLT panels connected together on the site. The actual connections are commonly neglected in design calculations. Hence, a CLT floor ...
Numerical modelling of concrete-filled steel tubular short columns under axial compression
(Building Materials and Structures, 2023)
The paper presents three-dimensional numerical models of short concrete-filled
steel tubular circular columns that can successfully describe the column behaviour
under axial compression. Several of the most commonly used ...
Stability Calculation of the Plane Steel Frame Structures Using Tangent Modulus Theory
(Hindawi, 2023)
This paper considers the phenomenon of the instability of steel plane frame structures in the elastic-plastic domain. The numerical analysis uses FEM, where the corresponding stiffness matrices are based upon the trigonometric ...