Претраживање
Приказ резултата 1-10 од 28
Numerical modelling of concrete-filled steel tubular short columns under axial compression
(Building Materials and Structures, 2023)
The paper presents three-dimensional numerical models of short concrete-filled
steel tubular circular columns that can successfully describe the column behaviour
under axial compression. Several of the most commonly used ...
Potential and benefit of green roof energy renovation of existing residential buildings with a flat roof in Belgrade
(Applied Sciences, MDPI, 2023)
This paper considers the phenomenon of the instability of steel plane frame structures in the elastic-plastic domain. The numerical analysis uses FEM, where the corresponding stiffness matrices are based upon the trigonometric ...
Augmented state estimation of urban settings using intrusive sequential Data Assimilation
(arXiv preprint arXiv:2301.11195, 2023)
A data-driven investigation of the flow around a high-rise building is per- formed combining heterogeneous experimental samples and RANS CFD. The coupling is performed using techniques based on the Ensemble Kalman Filter ...
Experimental and numerical study of structural damping in a beam with bolted splice connection
(Thin-Walled Structures, 2023)
The objective of this research is to develop a numerical model of one widely used bolted beam splice connection
that dissipates energy through structural damping. The reference experimental setup is carefully designed ...
A multi-fidelity wind surface pressure assessment via machine learning: A high-rise building case
(Elsevier, 2023)
Computational fluid dynamics (CFD) represents an attractive tool for estimating wind pressures and wind loads on high-rise buildings. The CFD analyses can be conducted either by low-fidelity simulations (RANS) or by ...
Shear design of circular concrete sections according to the EC2 truss model
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Blvd. Partizanski odredi No. 24 P.Box. 560, 1000 Skopje, Republic of North Macedonia, 2023)
Shear design in Eurocode 2 is generally developed for rectangular sections or T-sections that have
clearly defined tension reinforcement, concentrated in the cross-sectional tension zone, and an
unambiguous width of ...
Parametric Study of Additional Temperature Stresses in Continuously Welded Rails on Steel Truss Railway Bridges
(MDPI (Basel, Switzerland), 2023)
Additional temperature stresses in continuously welded rails (CWRs) are caused by track/bridge interaction (TBI) due to thermal actions. Exceeding permissible stresses in CWRs on the bridge can lead to track buckling or ...
Experimental results of reinforced concrete frames with masonry infills with and without openings under combined quasi‑static in‑plane and out‑of‑plane seismic loading
(Bulletin of Earthquake Engineering, 2023)
Reinforced concrete (RC) frames with masonry infills can be encountered all over the world, especially in earthquake prone regions. Although masonry infills are usually not considered in the design process, in the case of ...
Free vibration analysis of FGM plates by using layer wise displacement model
(Serbian Society for Computational Mechanics, 2023)
In this paper, the free vibration analysis of simply supported functionally graded material (FGM) plate is analyzed. The displacement model based on Generalized Laminate Plate Theory (GLPT) assumes layer wise (LW) linear ...
Stability analysis of FGM plates by using layer wise displacement model
(Serbian Society for Computational Mechanics, 2023)
In this paper, the stability analysis of simply supported functionally graded material (FGM) plate under mechanical in–plane compressive loads is analyzed. The displacement model based on Generalized Laminate Plate Theory ...